User's Manual

September 2013 63-70-076-DOC-1 29
MARS-24ATRUser Manual
4.4.3 getting A reAder connected using the reAdermAnAger
Step 1: Open the ReaderManager.
ReaderManager will automatically detect all readers on the local network. When a reader is connected for the rst time
to a network using an Ethernet cable or a host computer using a USB cable, the reader is identied by its Model Name-
Serial Number (It is recommended that these be kept).
Users can replace or add additional information to the Model Name-Serial Number such as a physical location or
customer ID number.
Subsequently when a user starts using the reader the new name will appear on the list of readers in the Connection
menu.
Tip: If you want to use the new name immediately, simply power cycle the reader to view the new name on the
Connection menu list.
To change a reader network name:
From the Tools menu, select System then Conguration System. The window shown below will be displayed.
Click the column on the right of Customer ID and enter the name you would like the Reader to be identied as. This is
the name that will appear on the Connection menu.
Click the Save button on the right to save your changes to the reader, or click the Refresh button to restore the previously
saved name.