User's Manual

6.2 HOW TO CHECK A TAG CONFIGURATION MODE
The tag con guration mode can be checked with the ReaderManager:
Go to Tools -> System -> Interrogate Command.
In Reply select Normal and click Send.
Then go to Tools -> System -> Table of Tag Messages to see the tag con guration in the
Con g column. The messages of all the tags currently in the reader antenna  eld can be seen.
2000 means that the tag has been recon gured to ST ¼ normal power mode con guration. 6000
means that a tag is in ST normal power mode.
6.3 HOW TO CHECK A TAG CHIP TYPE (IT OR ST)
The tag chip type can be checked with the ReaderManager:
Go to Tools > System > Tag Memory Map
Place a tag on the antenna. The tag ID# will appear below “Current tags”
Left mouse click on the ID#
The chip type can be seen in the “Value” column of the System Memory in line “0”:
4000 means ItemTag chip
4001 means StackTag chip
1.
2.
3.
1.
2.
3.
4.
38 63-70-006-DOC 07-Jul-07
User Manual
MARS-24E