User's Manual

3.4.4 Changing the Reader’s Network Setup
Ensure the Reader is connected as described above.
From the Tools menu, select System then Configuration System. The
window shown below will be displayed.
Click the column on the right of Customer ID and enter the name you would
like the Reader to be identified as. This is the name that will appear on the
Connection menu.
Click the Save button on the right to save your changes to the reader, or
click the Refresh button to restore the previously saved name.
To change the Reader’s network settings, click the Network Configuration
tab.
MDR-1109 USER MANUAL 60-70-002-DOC ver.1 21