Specifications

Section 7: Interface Specifications

Page 7-14

CG4 Series Operator Manual

7.5 LOCAL AREA NETWORK (LAN) ETHERNET (cont’d)

7.5.6 TELNET Specifications

TELNET complies with RFC854. This consists of an interactive menu form, and it enables you to change and

refer internal setup and to display status. To change the setting details, enter 'root' user name and password

at the time of login. Default ROOT password is set to null (line feed only).

Each printer model name will appear in [Model Name].

For the detailed settings of [1:Setup TCP/IP], refer to

Section 7.5.7 Setting/Displayed Items.

7.5.7 Setting/Displayed Items

The following table shows the settings and referable sections as well as various variables.

TCP/IP related settings

Variable identifier Default (Factory setting) Setting range

IP address 0.0.0.0 (Externally obtained) 0.0.0.0 ~ 255.255.255.255

Subnet mask 0.0.0.0 (Derived from IP address) 0.0.0.0 ~ 255.255.255.255

Gateway address 0.0.0.0 (Invalid) 0.0.0.0 ~ 255.255.255.255

RARP protocol ENABLE ENABLE/DISABLE

DHCP protocol ENABLE ENABLE/DISABLE

Keep alive time 180(sec) 30 ~ 300

Socket cancel Normal Normal / compatible

ROOT password NULL (No password) Up to 16 random alphanumeric

characters

In MS-

DOS command prompt, type in [TELNET xxx.xxx.xxx.xxx (IP address)] and enter

user name and password to advance to the display below.

SATO PRINTER ModelName TELNET server.

‘root’ user needs password to login

password:

User ‘root’ logged in

No. Item Value (level.1)

----------------------------------------------------------

1 : Setup TCP/IP

2 : Display status

99 : Exit setup

Please select(1-99)?