Label Maker User Manual

Section 3: Configuration and Operation
LM Basic 408e/412e Operator’s Manual Page 3-21
3.12 MAINTENANCE MODE (CONT’D)
3.12.5 All Clear Mode
In All Clear settings, you can clear the Counter/EEPROM. Press the
FEED button to proceed.
3.12.6 Counter/EEPROM clear
In this screen you can choose to clear either the Head Counter or
the EEPROM. The default value is COUNTER.
Use the LINE button to select COUNTER or EEPROM as required.
Press the FEED button to confirm the reset and proceed to the next
screen.
3.12.7 Clear Confirmation
In this screen you have to confirm whether to proceed with the
clearing of the counter or EEPROM. The default value is NO.
Use the LINE button to select YES or NO as required.
Press the FEED button to confirm the reset and the last screen
appears to confirm the clearance.
ALL CLEAR MODE
ALL CLEAR
COUNTER EEPROM
COUNTER CLEAR
ALL
COUNTER CLEAR
ALL
XXXXXXX ALL CLEAR
YES NO
COUNTER CLEAR
ALL
XXXXXXX ALL CLEAR
COMPLETED