Specifications

Operation Manual
Operation ManualOperation Manual
Operation Manual 2. Introduction
2. Introduction2. Introduction
2. Introduction
CL408
CL408CL408
CL408
e
ee
e
/412
/412/412
/412
e
ee
e
9
9 9
9
Status LED
Status LEDStatus LED
Status LED
OFF: Offline
Green: Online
Flashing Green: Data receiving or input buffer near full
Orange: Data compiling
Red: Error condition
FEED Key:
FEED Key: FEED Key:
FEED Key: Momentary switch. Pressing
this key feeds one blank label through the
printer when it is off - line. When the printer
is on - line, another copy of the last label will
be printed if “Reprint w\Feed is selected in
L
LL
L INE Key:
INE Key: INE Key:
INE Key: Momentary switch. Pressing
this key toggles the printer between the on -
line and off - line mode. When the printer is
on - line, it is ready to receive data from the
host. This key acts as a pause during a
print job by taking the printer off - line. It can
also be used as a pause function key to
stop the printer during the printing process.
DSW2 & 3:
DSW2 & 3: DSW2 & 3:
DSW2 & 3:
DIP Switches to set operational parameters of pr inter.
NOTE: Optional RS232 Communication Card contains DSW1
switches which are configured when supplied with the printer.
PITCH Potentiometer:
PITCH Potentiometer: PITCH Potentiometer:
PITCH Potentiometer:
Adjusts home
position of the label(+/ - 3.75mm).
Affects stop positi on of label feed, print
position, and dispense position.
Larger adjustments should be made
using the Pit ch Offset function.
PRINT Potentiometer:
PRINT Potentiometer: PRINT Potentiometer:
PRINT Potentiometer:
To adjust print darkness (fine adjustment).
Function Indicator
Function IndicatorFunction Indicator
Function Indicator :
: :
: When C utter
or Dispenser is used .
OFFSET Potentiometer:
OFFSET Potentiometer: OFFSET Potentiometer:
OFFSET Potentiometer:
To adjust back/forward
feed for dispenser (+/ - 3.75mm).
The printer menu.