Specifications
22
22 22
22 CL408
CL408CL408
CL408e
ee
e/412
/412/412
/412e
ee
e
3. Configuration
3. Configuration3. Configuration
3. Configuration Operation Manual
Operation ManualOperation Manual
Operation Manual
NOTE:
NOTE:NOTE:
NOTE: The signals on pins 1, 3, 4 and 6 each have an open col-
The signals on pins 1, 3, 4 and 6 each have an open col-The signals on pins 1, 3, 4 and 6 each have an open col-
The signals on pins 1, 3, 4 and 6 each have an open col-
lector output. These pins normally measure +.07V max-
lector output. These pins normally measure +.07V max-lector output. These pins normally measure +.07V max-
lector output. These pins normally measure +.07V max-
imum when a true condition exists. If a false condition
imum when a true condition exists. If a false condition imum when a true condition exists. If a false condition
imum when a true condition exists. If a false condition
occurs, the voltage will drop to 0V. To achieve a signal
occurs, the voltage will drop to 0V. To achieve a signal occurs, the voltage will drop to 0V. To achieve a signal
occurs, the voltage will drop to 0V. To achieve a signal
level of +5V, you must add a 1K ohm, ¼ W pull-up resistor
level of +5V, you must add a 1K ohm, ¼ W pull-up resistor level of +5V, you must add a 1K ohm, ¼ W pull-up resistor
level of +5V, you must add a 1K ohm, ¼ W pull-up resistor
between the open collector output pin and Vcc (pin 13)
between the open collector output pin and Vcc (pin 13) between the open collector output pin and Vcc (pin 13)
between the open collector output pin and Vcc (pin 13)
as illustrated. This will provide a signal level of +5V for a
as illustrated. This will provide a signal level of +5V for a as illustrated. This will provide a signal level of +5V for a
as illustrated. This will provide a signal level of +5V for a
true condition and 0V when a false condition exists. The
true condition and 0V when a false condition exists. The true condition and 0V when a false condition exists. The
true condition and 0V when a false condition exists. The
maximum voltage that can be applied to these pins is
maximum voltage that can be applied to these pins is maximum voltage that can be applied to these pins is
maximum voltage that can be applied to these pins is
+50V and the maximum current they can sink is 500 mil-
+50V and the maximum current they can sink is 500 mil-+50V and the maximum current they can sink is 500 mil-
+50V and the maximum current they can sink is 500 mil-
liamps.
liamps.liamps.
liamps.