Specifications

24
24 24
24 CL408
CL408CL408
CL408e
ee
e/412
/412/412
/412e
ee
e
3. Configuration
3. Configuration3. Configuration
3. Configuration Operation Manual
Operation ManualOperation Manual
Operation Manual
3.2
3.23.2
3.2 Default Settings
Default SettingsDefault Settings
Default Settings
Switch Selections
Switch Selections Switch Selections
Switch Selections
All switches except DSW 2-5 are placed in the
OFF
OFFOFF
OFF position
(default) for shipping. This will result in the following operating con-
figuration:
• Communications: 8 data bits, no parity, 1 Stop bit, 9600 Baud
• Protocol: Ready/Busy
• Sensor: Gap Sensor
• Receive Buffer: Multi Job
• Mode: Batch/continuous
• Pitch: Sensor Used
• Back feed: Enabled
• External Signals: Disabled
Software Default Settings
Software Default Settings Software Default Settings
Software Default Settings
The CL408e
ee
e/412e
ee
e stores the software settings upon receipt and
uses them until they are again changed by receipt of a command
containing a new setting. These settings are stored in non-volatile
RAM and are not affected by powering the printer off. The printer
may be reset to use the default software settings by depressing the
LINE
LINELINE
LINE and FEED
FEEDFEED
FEED keys simultaneously while powering the printer on.
This will result in the following default configuration:
• Print Darkness: "3"
• Print Speed: 4 inches per second
• Print Reference: Vertical = 0001, Horizontal = 0001
• Zero: Slash
• Auto On Line: Enabled
• Ignore CR/LF: Disabled
• Character Pitch: Proportional
• Cover Open Sensor: Enabled
• Auto Online Feed: Disabled
• Feed On Error: Disabled
• Repeat Print: Enabled
• Forward/Backfeed: Standard
• Select Language: English
• Priority Setting: LCD