Specifications
Operation Manual
Operation ManualOperation Manual
Operation Manual 3. Configuration
3. Configuration3. Configuration
3. Configuration
CL408
CL408CL408
CL408e
ee
e/412
/412/412
/412e
ee
e 27
27 27
27
3.3.5
3.3.53.3.5
3.3.5 Pitch Offset and Direction
Pitch Offset and DirectionPitch Offset and Direction
Pitch Offset and Direction
The label pitch is the distance from the leading edge (the edge that
comes out of the printer first) of a label and the leading edge of the
next label. The leading edge position of the label can be adjusted
relative to the print head +/- 49 mm in increments of 1 mm using
the following procedure. Once the position is set, it can be adjusted
+/- 3.75 mm using the
PITCH
PITCHPITCH
PITCH
potentiometer on the adjustment
panel.
To change the setting perform the following steps:
1. Use the
LINE
LINELINE
LINE
key to step the counter to the desired position.
The display will increment one step for each time the
LINE
LINELINE
LINE
key
is pressed. If the
LINE
LINELINE
LINE
key is pressed continuosly the reading
will advance to a setting of 49 mm after which it will automatically
wrap and start with
"00"
"00""00"
"00"
again. The pitch direction set in the pre-
vious step will be displayed in front of the
Offset
OffsetOffset
Offset
setting.
2. Once the setting is correct, press the
FEED
FEEDFEED
FEED
key to accept the
setting and advance to the
CANCEL PRINT
CANCEL PRINTCANCEL PRINT
CANCEL PRINT
job display.
3. You may wish to check your settings by printing a test label after
you have completed the adjustments to ensure that they are cor-
rect.
3.3.6
3.3.63.3.6
3.3.6 Cancel print Job
Cancel print JobCancel print Job
Cancel print Job
If the printer has a print job(s) loaded in memory, selecting
YES
YESYES
YES
will
cause the job(s) to be cleared. The default selection is
NO
NONO
NO
. Make
LINE FEED
LINE FEEDLINE FEED
LINE FEED
DIRECTION
DIRECTIONDIRECTION
DIRECTION
MOVED WITH MINUS(-)
MOVED WITH MINUS(-)MOVED WITH MINUS(-)
MOVED WITH MINUS(-)
OFFSET
OFFSETOFFSET
OFFSET
ORIGINAL PRINT LINE
ORIGINAL PRINT LINEORIGINAL PRINT LINE
ORIGINAL PRINT LINE
MOVED WITH
MOVED WITHMOVED WITH
MOVED WITH
POSITIVE(+) OFFSET
POSITIVE(+) OFFSETPOSITIVE(+) OFFSET
POSITIVE(+) OFFSET
PITCH OFFSET
+00mm