Specifications

44
44 44
44 CL408
CL408CL408
CL408e
ee
e/412
/412/412
/412e
ee
e
5. Troubleshooting
5. Troubleshooting5. Troubleshooting
5. Troubleshooting Operation Manual
Operation ManualOperation Manual
Operation Manual
Note:
Note:Note:
Note: This error condition is stored in the printer memory. To
This error condition is stored in the printer memory. To This error condition is stored in the printer memory. To
This error condition is stored in the printer memory. To
reset this error it is necessary to open the print head
reset this error it is necessary to open the print head reset this error it is necessary to open the print head
reset this error it is necessary to open the print head
while printer power is ON.
while printer power is ON.while printer power is ON.
while printer power is ON.
LABEL
END
Label supply roll empty Replenish label supply
Label stock not routed through
sensor
Reload labels correctly
Label sensor not positioned
correctly
Adjust sensor position
Label sensor blocked Clean label sensor
Incorrect label sense thresh-
old setting
Adjust label sense threshold
Platen drive malfunction See Service Manual
RIBBON
END
Ribbon supply roll empty Replenish ribbon supply
Ribbon sensor out of align-
ment
Realign ribbon sensor
Ribbon sensor blocked Clean ribbon sensor
No cardboard core on ribbon
rewind
Use cardboard core on ribbon
rewind
SENSOR
ERROR*
**
*
Auto Treshold not in range Check label path, sensor posi-
tion and DIP switch setting
No Label
Drive
Timing Belt bad/loose Replace/tighten timing belts