User manual

SAP Device Driver for SATO Printers 29-62
User Manual
ii. Create Print Control in device type
Figure 27 Defining Print Control in Device type
Use SPAD->Full Administration->Device Types to open the Print Controls tab of the
device type. Add a new barcode print control (Prefix SB) and input the hex value of
Control Character Sequence. In this example, the hex value of “<Esc>EU1203” is
entered for Print Control SB012.
This print control defines Sato Barcode commands for GS1-128 (UCC/EAN128) with
CC-C with Narrow Barcode with = 3 dots. The Barcode Height will be extracted from the
Barcode Definition (Figure 26 Customized Barcode Definition). The Barcode Data will
be supplied from SmartForms or SAP Database.
iii. Mapping of Barcode Definition to Print Control
Go to SE73->Printer Bar Codes
Figure 28 Mapping of Print Control
Click on the Device Type to add the barcode mapping to Print Control.