Specifications

Error Messages

9 CHNG CARD BATT PC card battery has run out.

As the data in the card might be lost, you will need to store again.

10 WRITE PROTECT ON Cannot write to PC card.

Please ensure card is not write protected.

11 CONFIRM CLR TYPE Wrong usage and clearing methods

With respect to proper card usage, please clear again.

12 BLANK FORMAT An unregistered format number has been inputted.

Please confirm format no.

13 DATA ERR Inputted value, setting exceeded specified limits.

Please input values within specified limits.

14 C/D VERIFY ERR Wrong input of check digit.

Please input check digit.

15 NO UP LOAD DATA There is no preset, parameter, etc, data to be transmitted

16 INTERFACE ERR Error in RS-232C interface.

Please confirm printer’s and host computer’s interface mode.

(Interface speed, data length and parity)

17 HEAD ERR Error in printer head.

Clean the head surface, switch on the printer again and confirm.