Service manual

PN 9001098
Rev. A
2-15
SATO M-10e TT/DT Printers Service Manual
Section 2. Configuration
LCD Panel —Advanced Mode
Set Calendar
The Calendar is an optional feature in M-10e printers allowing the date and time to be set
manually using the LCD Display or via the <ESC>WT Calendar Set command. The last
setting, set either manually via software command or received by the printer, will be the value
used. The format of the display is YY/MM/DD hh:mm (Year/Month/Day/hours:minutes).
The date format is fixed and cannot be changed.
set calendar
yes no
STEP PROCEDURE
1. The underline cursor will initially be positioned underneath the +
Pitch Direction Setting. Press the LINE key to select the vertical + / -
pitch offset value.
2. Press the ENTER key to advance to the first vertical digit. The
display will change one increment each time the LINE or FEED key
is pressed. Once the desired setting is selected, press the ENTER key
to accept the setting and advance to the second digit. Once again the
display will change one increment each time the LINE or FEED key
is pressed. Continue advancing through the vertical digits. After the
final vertical setting is set, press the ENTER key to move to the +/-
horizontal pitch offset value. Press the LINE or FEED to select the
horizontal pitch offset value, then repeat the above sequence to
advance throught the horizontal digits. After the final horizontal
setting is set, press the ENTER key to accept the setting and advance
to the next adjustment.
pitch offset
+/- 00mm
Print Offset (Continued)
Horizontal Offset is the distance that the label image is shifted either to the right or left on the
label. For a positive setting the image is shifted to the left (towards the inside edge of the label).
For a negative setting the image is shifted to the right (towards the outside edge of the label).
This setting changes the base reference point for all subsequent label jobs. The effect is identical
to the <ESC>A3 Base Reference point command. The maximum values that can be set for each
is +/- 3199 dots.
The Set Calendar screen will display only if the Calendar Option is installed in the
printer.