Service manual

SATO M-10e TT/DT Printers Service Manual

PN 9001098

Rev. A

2-30

Section 2. Configuration

LCD Panel — Service Mode

This selection allows user to select the language used in the LCD menu and error messages.

The selections are English, French, German, Spanish, Italian and Portuguese.

Select LCD Disply

Language

select language

english

STEP PROCEDURE

1. Use the keys to select displayed language.

2. Once the correct setting is selected, press ENTER to confirm the

displayed language and advance to the next screen.

STEP PROCEDURE

1. The cursor should be positioned over the first digit selection.

Use the keys to step to the desired setting.

2. Press the ENTER key to advance the cursor to the second digit of the

desired hexadecimal code.

3. Press the LINE key to step to the desired setting.

4. Once the correct setting is selected, press ENTER to confirm the

settingand advance to the next screen.

Euro Code

(Continued)

Ignore Can/Dle

Yes No

ignore can/Dle

yes No

STEP PROCEDURE

1. Use the keys to select YES (Valid) or NO (Invalid).

2. Once the correct setting is selected, press ENTER to confirm the

setting and advance to the next screen.

If the printer is placed in the Multi-Item Buffer Mode (DSW2-5 = OFF), the user can chose to

ignore CAN (18H) and DLE (10H) commands used in bi-directional communications. If the

Single Item Buffer Mode is chosen (DSW2-5 = ON), this display will be skipped.