Service manual

PN 9001098
Rev. A
4-5
SATO M-10e TT/DT Printers Service Manual
Section 4. Electrical Checks and Adjustments
4.4 Potentiometer Assignments
POTENTIOMETERS ARE
LOCATED ON MAIN
CIRCUIT BOARD
POTENTIOMETERS ARE LOCATED
UNDERNEATH A FLIP COVER ON THE
FRONT PANEL
VR TO ADJUST ITEM POSITION DIAL
VR5 (IM) Eye Mark Sensor 4
VR6 (GAP) Gap Sensor 5
VR7 (PS) Label Penetrating Sensor 8
VR8 (PE) Paper End Sensor
VR9 (PITCH) Pitch
(Use with VR3 on Cover)
VR TO ADJUST ITEM
VR1 Print Darkness
VR2 Offset
VR3 Pitch Correction
(Use with VR9 on Main PCB)
VR4 Display