Spec Sheet
GENERAL SPECIFICATIONS
MB200i | MB400i | MB410i
PRINTER MODEL MB200i MB400i MB410i
PRINT SPECIFICATIONS
Printing Method Direct Thermal
Print Resolution 203 dpi (8 dots/mm) 203 dpi (8 dots/mm) 305 dpi (12 dots/mm)
Printing Speed
Up to 4 ips (103 mm/s) at 16% printing coverage. Default Print Speed is 3 ips (75 mm/s).
Maximum Print Area 1.89" (48 mm) W x 6.3" (160 mm) L 4.09" (104 mm) W x 11.69" (297 mm) L
MEDIA SPECIFICATIONS
Sensor Type Reflective Sensor (for use with pre-printed marks). See-Through Sensor (for die-cut label with gap) Dispenser Sensor.
Media Type Roll Die-Cut Label with Gap or Pre-Printed Label, Linerless Media, Continuous Receipt Paper
Media Size Width 1.1" - 2.2" (28 mm - 57.5 mm)
1
2" - 4.49" (53 mm - 114 mm)
1
Length 0.63" - 6.4" (16 mm - 163 mm)
1
1.1" - 11.8" (28 mm - 300 mm)
1
Thickness 0.003" - 0.007" (0.064 mm - 0.19 mm)
Roll Specs Outer Diameter: 2.63" (67 mm) - Inner Diameter: 0.75" (19 mm) or 1" (25 mm) for standard labels
0.4" (10 mm) coreless for receipt paper or 0.75" (19 mm) for linerless paper
FONT/SYMBOLOGIES
Internal Fonts XU, XS, XM, XB, XL, OCR-A, OCR-B, CG Times and Triumvirate
Barcode
Symbologies
Linear UPC-A, UPC-E, EAN-8, EAN-13, Code 39, Code 93, Code 128, Codabar, MSI, Bookland, Industrial 2/5,
Interleaved 2/5, Matrix 2/5, Postnet™, GS1-128, GS1-DataBar™
2-D PDF417, Micro PDF417, Truncated PDF417, Maxicode™, Data Matrix, QR Code, Composite Symbology
INTERFACE CHARACTERISTICS
Interfaces RS232C, Bluetooth, IrDA (Ver.1.2, Standard Protocol, IrCOMM (3-wire cooked)),
802.11b/g Wireless LAN (Supports WEP 64/128bit, WPA, WPA (PSK, 802.1x), and EAP)
USB
OPERATING CHARACTERISTICS
Battery 7.4 V (2400mAH) Lithium Ion 14.8V (1700mAH) Lithium Ion
Environment Operating 5º F – 122º F (-15º C – 50º C), 20%-80% RH, non-condensing
32º F – 122º F (0º C – 50º C), 20%-80% RH, non-condensing for 802.11g/b
Storage
-13º F – 140º F (-25º C – 60º C), 20%-80% RH, non-condensing
Regulatory Approvals FCC Class A, B, C, UL, CE, TÜV, CSA
Dimensions
(with rubber boots)
3.5" (88 mm) L x 5.03" (128 mm) W x 2.9"
(73 mm) H
3.9" (99 mm) L x 8" (202 mm) W x 6.5" (165 mm) H
Weight (with rubber boots) 0.9 lbs. (405 g) including battery pack 2 lbs. (910 g) including battery pack
Drop Specication 6 ft. (1.83 m) - flat sides of printer to
concrete
5 ft. (1.5 m) - flat sides of printer to concrete
OTHER
Optional Accessories Battery Charger (Single and Multi-Battery Capabilities), Spare Battery, AC Adapter, Serial to PC Cable
Optional Swivel Belt, Weather-Resistant
Carrying Case
2
, Holster
2
, Optional
Shoulder Strap
Shoulder Bag with Rain-Resistant cover
2
,
Shoulder Strap and Belt Bag
2
OPERATIONAL FEATURES
Firmware Features Auto Power Save. Printer enters sleep mode when idle for 5 seconds.
Printer will power off automatically when idle for another 5 minutes (Programmable power off feature).
Self Diagnosis Tools Head Check, Battery Balance Check, Paper End, Head Open, Test Print, Over charge/discharge protection
1
Includes Backing Liner
2
Non-booted Models
www.satoamerica.com
©2014 SATO America, Inc. All rights Reserved. Rev G • Any unauthorized reproduction of this content, in part or whole, is strictly prohibited • SATO is a registered
trademark of SATO Corporation and its subsidiaries in Japan, the U.S. and other countries. All other trademarks are the property of their respective owners.
CORPORATE
10350-A Nations Ford Rd
Charlotte, NC 28273
Phone: (704) 644-1650
Fax: (704) 644-1662
satosales@satoamerica.com
UNITED STATES MEXICO
CANADA
LABEL MANUFACTURING, SERVICE & SALES
CENTRAL AMERICA
CARIBBEAN