User manual

• Remove the plugs on the upper side of
both doors and move them to the other
side
• Re-insert the lower door on the lower
hinge pivot .
• Insert the middle hinge into the left drill of
the lower door.
• Unscrew the upper hinge pivot and place
it on the opposite side.
• Fit the upper door on the upper door piv-
ot.
• Re-insert the upper door on the middle
hinge pivot slightly tilting both doors.
• Re-screw the middle hinge . Do not for-
get the plastic spacer .
2
1
• Remove the covers (B). Remove the cov-
er pins (A).
• Unscrew the handles (C) and fix them on
the opposite side.
• Re-insert the cover pins (A) on the oppo-
site side.
A
C
B
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabi-
net.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natural
fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The After
Sales Service specialist will carry out the re-
versibility of the doors at your cost.
TECHNICAL DATA
Dimension
Height 1850 mm
Width 595 mm
Depth 658 mm
Rising Time 20 h
Voltage 230 - 240 V
Frequency 50 Hz
The technical information are situated in the
rating plate on the internal left side of the
appliance and in the energy label.
64