Owner`s manual

Playback
Press @PURE DIRECT (or [lJPURE DIRECT)
to turn the Pure Direct mode on or off.
@PURE DIRECT lights up when you set Pure Direct
mode on.
The following features are disabled in the Pure Direct
mode.
- sound field program, tone control
- display and operation
of the Option menu and Setup
menu
- multi-zone function
,',
~Ij>~
• The font panel display automatically turns off while this unit in the Pure
Direct mode.
6hangiijg inform~tion on the front
t1l~nel.~isplay
Press @INFO (or [Q]INFO) repeatedly.
Available information differs depending on the selected
input source.
For example, if you select
HDMIl input and display "DSP
Program", the following screen appears on the front panel
display.
Input source
I
I I 11 II/I 1
1"1 .LI I I .L
C" + ~", ::: i (j ~·I +
1-.
1
'.'1 ..... .:. _'I :~ -'
I
Sound field program
HOMI 480p
HOMI 1080p
HOCP Error
Plug your headphones in the (h)PHONES jack on
the
front panel.
When you select a sound field program while using the
headphones, the mode
is automatically set to SILENT
CINEMA mode.
Notes
• When you connect headphones, no signals are output at the speaker
terminals.
• When multi,channel signals are processed, sounds in all channels are
divided to left and right channels. When "MULTI
CH" is selected as the
input source, only front LlR sounds are output from the headphones.
When HDMI 1-4 or AVI-4 is selected as the input source,
you can display audio/video signal information.
,0,
~Ij>~
• Input signal information is displayed on both the GUI screen and front
panel display.
1 Select the desired input source and then
press [lIDOPTION on the remote control.
The Option menu for the selected input source is
displayed (page 47).
2 Press lIQICursor /:, I V to select "Signal Info"
and then press lIQIENTER.
Information on the input signal is displayed. See
page 48 for details about each information.
Signal Into
<Audio>
Format Dolby TrueHD + Dolby EX
Channel 3/2/0.1
Sampling Frequency 96.0kHz
Bitrale
<Video>
Video In
Video Oul
, ~l1essage
Input source
HDMI1-4
AV1-6
AUDI01/2
V-AUX
PHONO
iPod (DOCK) (simple
remote mode)
BLUETOOTH (DOCK)
USB
iPod (DOCK) (menu
browse mode)
TUNER
SIRIUS
XM
MULTI CH
Note
Information
Input
DSP Program
Audio Decoder
(on play information display)
DSP Program, Audio Decoder,
Song, Artist. Album
(on GUI screen)
List
Frequency,
DSP Program,
Audio Decoder
(for HD Radio information)
Call
Sign*, Category*, Artist!
Song*, Album*, Tag Info, DSP
Program, Audio Decoder,
Frequency
Channel, Category, Artist /
Song,
Composer, Antenna, DSP
Program, Audio Decoder
Channel, Category, Artist /
Song,
Antenna, DSP Program,
Audio Decoder
Input
Note
• If an HOMI related error occurs, error information is displayed at
the bottom of the screen.
3 To exit the Option menu, press [lIDOPTION.
24 En
• Information marked with "0" is not available when analog HO Radio
station
is selected.