Owner`s manual
Editing
surround
decoders/sound
field
programs
• Parameters
for
adjusting reverberant
sound
Reverb Time
Adjustable
range:
1.0
to 5.05
Reverb Time parameter adjusts the attenuation time
of
the
rear reverberant sound based on the time that about 1kHz
reverberant sound takes for 60dB
of
attenuation.
Reverberant sound attenuates faster as you decrease the
value. Reverb Time adjustment allows you to create a
natural reverberant sound,
by
setting the attenuation time
longer for a sound source or room with less echo, or
shorter for a sound source or room with more echo.
Source sound
L-~J....L.,LU'--'---_...L----"'-
---"'-
__
"':>""
__
Time
(dB)
Parameters for certain sound field
programs
• Parameter for MOVIE
sound
field programs
Decode Type
Choices: PLIIx
Movie
(PLII
Movie),
Neo:6
Cinema
Selects the decoder type for use with the MOVIE sound
field programs.
Reverb Level
Adjustable
range: 0
toloo%
Reverb Level parameter adjusts the reverberation sound
level. Increasing the value
of
Reverb Level makes the
reverbration sound level higher, which allows you to
create more echo.
Reverb Time
Large =5.0s
Long
reverberation
I
£f}J
"'.
"'.~
/1'
Rear
Source
sound
reverberation
IEarly reflection
I~
I
I
I
I
I
I
I
Small =1.0s
Rear reverberation
Sound source
Short
reverberation
\..
\ *
Reverb Delay
Adjustable
range: 0 to 250ms
Reverb Delay parameter adjusts the time difference
between the beginning
of
the direct sound and the
beginning
of
the reverberation sound. The larger the value,
the later the reverberation sound begins. Increasing the
value
of
Reverb Delay allows you to create a reverberant
sound
in
a wider area for the same Reverb Time.
Source sound
Note
•
You
cannot select a decoder for the following MOVIE sound field
programs.
- Mono Movie
- Sports
- Action Game
- Roleplaying Game
• Parameter
for
2ch Stereo
Direct
Choices:
Auto*,
Off
Automatically bypasses the DSP circuit and tone control
circuit when an analog sound source
is
selected as the
input source.
You
can enjoy a higher quality sound.
Auto Outputs sound
by
bypassing the DSP circuit and
tone control circuit when the "Bass" and "Treble"
tone controls are both set to 0 dB.
Off Do not bypass the DSP circuit and tone control.
• Parameters
for
7ch Stereo
Center
Levell
Surround L
Levell
Surround R
Levell
Surround Back
Levell
Presence L
Levell
Presence R Level
Adjustable
range: 0
to
100%
Adjusts the volume
of
the center, surround LIR, surround
back and presence LIR channels in the 7ch Stereo
program. The available parameters differ depending on the
setting
of
the speakers.
Reverb TimeReverb Delay
1
GOdB
••
-
...
,
..
",
j
~L-...L..-
__
~-'---
Time
14
.1'---4
--_J
(dB)
52 En