Owner`s manual
• Parameter for Straight Enhancer and 7ch
Enhancer
Effect Level
Choices: High*, Low
Adjusts the Compressed Music Enhancer effect level.
When the high-frequency signals
of
the source
is
emphasized too much, set the effect level to "Low".
To
reduce the effect, set this parameter to "Low".
Decoder parameters
You
can customize decoder effects
by
setting the
following parameters. For details about the types
of
decoders, see "Surround decode mode" (page 27).
• Parameter for PLllx Music and PLII Music
Panoram~l
Choices: Off*, On
Adjusts the soundscape
of
the front sound field. Sends
stereo signals
to
the surround speakers
as
well as the front
speakers for a wraparound effect.
Dimension
Adjustable range:
-3
to STD* to
+3
Adjusts the difference in level between the front sound
field and the surround sound field.
You
can adjust the
difference
in
level created
by
the software being played
back to obtain the preferred sound balance. The surround
sound gets stronger as you make the value more negative
and the front sound gets stronger
as
you make the value
more positive.
Center Width
Adjustable range: 0 to
3*
to 7
You
can spread the center sound toward left and right
according to your preference. Set this parameter to 0 for
outputting the center sound from the center speaker only,
or to 7 for outputting it from the front left/right speaker.
• Parameter for Neo:6 Music
Center Image
Adjustable range: 0.0 to 0.3* to 1.0
Adjusts the front left and right channel output relative to
the center channel to make the center channel more or less
dominant
as
necessary.
Editing
surround
decoders/sound
field
programs
53
En
I