Owner`s manual
Operating
various
settings
for
this
unit
(Setup
menu)
You
can call the Setup menu using the remote control and change the settings
of
various menus.
For details, read "Basic operation
of
the Setup menu" first, and see the respective pages.
Menu/Submenu
Speaker Setup
Auto Setup (YPAO)
Manual Setup
Speaker Configuration
Speaker Level
Speaker Distance
Equalizer
Test Tone
Sound Setup
Dynamic Range
Lipsync
HOMl Auto Lipsync
Auto Delay
Manual Delay
Function Setup
HOMl
HOMI Control
Standby Through
Audio Output
Resolution
Aspect
Display
Dimmer
Front Panel Display Scroll
GUl Position
Volume
Adaptive ORC
Max Volume
Initial Volume
Input Rename
Zone2
Zone2 Max Volume
Zone2 Initial Volume
54
En
Function
Sets items for speakers.
Automatically adjusts output characteristics
of
speakers.
Manually adjusts output characteristics
of
speakers.
Sets speaker configurations, such as connection status
of
speaker and a size
of
the
connected speaker (sound reproduction capacity), suitable for the listening
environment.
Separately adjusts volume
of
each speaker.
Adjusts timing at which each speaker outputs sound based on distances between
speakers and the listening position.
Selects an equalizer that adjusts speaker output characteristics.
Generates test tones.
Sets various items for sound outputs.
Adjusts dynamic ranges
of
speakers and headphones.
Adjusts delay
in
output timing between video signals and audio signals.
Sets on
or
off
of
automatic adjustments for delay between output timing between
video signals input from the HOMl jack and audio signals.
Fine adjusts a delay time
of
HOMI Auto.
Manually fine adjusts the delay
of
audio and visual output.
Sets various items for HOMl and display.
Sets various items for input sources.
Selects on or off
of
the HOMI control function when a component that supports
the HOMI control function is connected with this unit.
Selects on
or
off
of
output
of
HOMl signals input from the HOMl 1-4 jacks to the
HOMI OUT jack when this unit is on standby.
Selects this unit or a component connected to the HOMI OUT jack
of
this unit for
reproducing sound signals.
Sets resolution
of
the HOMl output that is converted from analogy visual input
signals.
Set an aspect ratio
of
images reproduced by HOMI signals converted from analog
video input signals.
Sets items for a video monitor or the front panel display.
Sets brightness
of
the front panel display.
Selects the way to display characters on the front panel display.
Adjusts top and bottom positions
of
the GUl screen displayed on the video
monitor.
Sets items for volumes.
Adjusts the dynamic range (difference between the maximum volume and the
minimum volume)
in
conjunction with the volume level.
Sets the maximum volume level so that the volume will not be accidentally
increased.
Sets the volume at the time this unit
is
turned on.
Changes input source names to be displayed on the
GUl
screen or the front panel
display.
Sets the maximum volume level and initial volume level
of
Zone2.
Sets the maximum volume level so that the volume will not be accidentally
increased.
Sets the volume at the time this unit is turned on.
Page
55
55
55
55
57
57
57
57
57
57
58
58
58
58
58
58
58
58
58
58
59
59
59
59
59
59
59
59
59
60
60
60
60