Owner`s manual
Operating
various
settings
for
this
unit
(Setup
menu)
Menu/Submenu
DSP
Parameter
Memory
Guard
Function
Sets
parameters
for
the
sound
field programs.
Protects
some
settings against accidental alteration.
Page
60
60
The Setup menu screen appears on both the GUI screen
and front panel display.
GUI screen
Front panel display
C
::I
..
IIIU
_11._
lUI
- •
.-
I
r.
;:.pea~::
er'
::.Io?i..UP
In this section, procedures
of
setting menus using the
video monitor are desclibed.
1
Pres!:~
[IDON
SCREEN
on
the
remote
control.
The GUI screen appears on the video monitor.
2
Press
IImCursor
V
to
select
"Setup"
and
then
press~
IImENTER.
The Setup menu appears on the video monitor.
3 Pres!:;
IImCursor
I:,.
/ V
to
select
the
desired
menu
then
press
IImENTER.
Items
of
the selected menu are displayed.
Example (Function Setup)
,.,
~<i>:'
•
To
return to the previous menu, press
!1mRETURN.
4
If
nec:essary,
press
IImCursor
I:,.
/ V
to
select
the
desired
submenu
then
press
IImENTER.
Example (Volume)
5
Press
IImCursor
1:,./
V
to
select
an
item
to
edit
and
then
press
IImCursor
<:J
/ C>
to
change
the
setting.
Some items
in
"Manual Setup"
of
"Speaker Setup"
take up a full screen.
To
display other items
in
"Manual Setup", press
IImCursor
I:,.
/
V.
Example (Speaker Configuration)
,1,
~<i>:'
•
To
configure other items, repeat step
5.
6 To
turn
off
the
GUI
screen,
press
[IDON
SCREEN.
Note
•
In
case !1mCursor
t:,
1V1<]1
C>
or other keys do not work after
closing the Option menu, press
~Input
selection
key
to
select the current input source again.
You
can set various items for speakers.
Two
kinds
of
adjustments are available. One
is
"Auto Setup" (YPAO)
for automatic adjustment and another
is
"Manual Setup"
for manual adjustment.
,1,
~<i>:'
• The default settings are marked with "*".
Auto
Setup
Automatically adjusts output characteristics
of
speakers to
obtain optimum balance for the output sound based on
positions and performances
of
the speakers and acoustic
characteristics or the room, which are automatically
measured. For details on operations, see page
19.
Manual Setup
Adjusts output characteristics
of
speakers based on
manually set parameters.
After "Auto Setup" (YPAO)
is
performed, you can check
automatically adjusted parameters in the "Manual Setup"
menu. Fine adjust the parameters for your preference if
necessary.
•
Speaker
Configuration
Sets speaker configurations, such as connection status
of
speaker and a size
of
the connected speaker (sound
reproduction capacity), suitable for the listening
environment.
55
En
I