Owner`s manual
Operating
various
settings
for
this
unit
(Setup
menu)
,0,
~<i'~
• The speaker configuration includes items for defining a speaker size:
"Large" or "Small". "Large" and "Small" refer to speakers with woofer
diameters
16
cm or larger and smaller than
16
cm, respectively.
Note
• If "LFE I Bass Out"
is
set to "Front", "Front Speaker" automatically
switches
to
"Large" even when
it
is
set
to
"Small".
Surround Speaker
Choices: None, Small*, Large
Sets sizes
of
left and right surround speakers.
Center Speaker
Choices: None, Small*, Large
Sets the size
of
center speaker.
Extra Speaker Assignment
Choices: Zone2*, Presence, None
Selects the application for the EXTRA SP terminals.
Zone2 Assigns the EXTRA SP terminals for the
speakers in the second zone.
Presence Assigns the EXTRA SP terminals for the
presence speakers.
None Disables the EXTRA SP terminals.
Note
•
When
setting
"Extra
SP
Assign"
to
"Zone2"
or
"Presence",
the
surround
back
channel
signals
for
main
output
is
separately
output
from
other
channels.
LFE I Bass Out
Choices: Subwoofer, Front, Both*
Selects speaker(s) for outputting low-frequency
components
of
the LFE (low-frequency effect sound)
channel or other channels. The output status is as follows.
None
Small
Large
Select this when no center speaker
is
connected. Center channel signals are spread
to front left and right speakers.
Select this when a small center speaker is
connected. Low-frequency components
of
center channel are output from a subwoofer.
If
a subwoofer is not connected they are
output from front speakers.
Select this when a large center speaker is
connected.
LFE channel signals
Low-frequency components
of
other channel signals
Parameter
Subwoofer
Front
Other
speakers speakers
Subwoofer
Output Not output Not output
Front
Not
output Output
Not
output
Both Output
Not
output
Not
output
Parameter Subwoofer
Front
speakers
Other
speakers
None
Small
Large
Select this when no surround speakers are
connected. Surround channel signals are
spread to front left and right speakers.
"Surround Back Speaker" automatically
switches to "None" when this is selected.
Select this when small surround speakers are
connected. Low-frequency components
of
surround channels are output from a
subwoofer.
If
a subwoofer is not connected
they are output from front speakers.
Select this when large surround speakers are
connected.
Front Speaker
Choices: Small, Large*
Sets the sizes
of
front left and right speakers.
[I]
Outputs low-frequency components
of
the channel
of
speaker,
the
size
of
which is set to "Small".
[2] Outputs low-frequency components when the sizes
of
speakers
are set to "Large".
[3] Outputs low-frequency
components
of
the front left and right
channels and the channel
of
speaker, the size
of
which is set to
"Small".
[4] Outputs low-frequency components
of
the front left and right
channels.
Select this when small speakers are
connected. Low-frequency components
of
the
front left and right channels are output from a
subwoofer.
Select this when large speakers are
connected.
Subwoofer
Front
Both
Small
Large
56
En
[I]
Not output
[3]
[2]
[3]
[4]
[2]
[2]
[2]
,0,
~<i'~
• When "None"
is
selected, the sound field programs automatically enter
the Virtual CINEMA DSP mode.
Surround Back Speaker
Choices: None, Large x I, Small
xl,
Large x 2, Small x 2*
Sets sizes
of
left and right surround back speakers.
None Select this when no surround back speaker
are connected. Surround back channel signals
are output from the surround L/R speakers
and subwoofer.
If
the subwoofer is disabled,
they are output from the surround L/R
speakers and front speakers.
Large x I Select this when one large surround back
speaker is connected.
Small x I Select this when one small surround back
speaker is connected.
Large x 2 Select this when two large surround back
speakers are connected.
Small x 2 Select this when two small surround back
speakers are connected.
'"
~<i'~
• When "Surround Back Speaker"
is
set
to
"None", "PLllx Movie",
"PLIlx Music" and "PLIIx Game"
of
the surround decode mode
(page 27) are not available.