Owner`s manual
Operating
various
settings
for
this
unit
(Setup
menu)
• Equalizer
Adjusts sound quality and tone using a parametric graphic
equalizer.
EQ Type Select
Choices: Auto PEQ, GEQ*,
Off
Selects an equalizer type.
Bass Crol;sover Frequency
Choices: 40Hz, 60Hz, 80Hz*, 90Hz, 100Hz, 110Hz, 120Hz,
160Hz, 200Hz
Sets the lower limit
of
the low-frequency component
output from a speaker with a size set to "Small" (Small x
I, Small x 2) Sound with a frequency below that limit is
output from a subwoofer or front speakers.
If
your subwoofer has a volume control or a crossover
frequency control, set the volume to half
or
the crossover
frequency at the maximum.
SubwoofEtr Phase
Choices: Nonnal*, Reverse
Sets the phase
of
your subwoofer
if
bass sounds are
lacking or unclear.
Auto PEQ
GEQ
Off
Uses a parametric equalizer selected in
"Auto Setup". Characteristics
of
the
currently used parametric equalizer are
displayed below "Auto PEQ".
Uses a graphic equalizer. Press
IlmENTER
to
adjust the characteristics
of
the graphic
equalizer.
Not use a graphic equalizer.
Choices: feet (ft)*, meters (m)
,0,
~<i>:'
• When only one surround back speaker
is
connected, "SB" appears
instead
of
"SBL" and "SBR".
•
You
can adjust the volume listening
to
test tones when you set "Test
Tone"
to
"On" (on this page).
• If your subwoofer has a volume control or a crossover frequency control,
set the volume
to
half or
the
crossover frequency at the maximum.
• Spealker Distance
Adjusts timing at which each speaker outputs sound so
that sounds from speakers reach the listening position at
the same time. Set unit (Unit) first and set the distance
of
each speaker.
Unit
Channels Front Left, Front Right, Center, Surround Left,
Surround Right, Surround Back Left, Surround
Back Right
Choices: 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz,
16kHz
Adjustable range:
-6.0dB
to
OdB*
to +6.0dB (0.5dB step)
Adjusts sound quality
of
each speaker using a graphic
equalizer. The graphic equalizer
of
this unit can adjust
signal levels in 7 frequency ranges.
To
adjust the signal level within each range, press
IlmCursor
<l
/
[>
to select the desired speaker while
"Channel"
is
selected, press IlmCursor
/:,
/ Vto select the
desired frequency band and then press
IlmCursor
<l
/
[>
to adjust the signal level.
•
TestTone
Choices: Off*,
On
Switches between on and off
of
an oscillator that generates
test tones. When "On"
is
selected, you can adjust the
settings
of
"Manual Setup" while listening to a test tone.
Off Not generate test tones.
On Generates test tones.
GEQ
Select this not to change the phase
of
your
subwoofer.
Select this to reverse the phase
of
your
subwoofer.
Reverse
Normal
• Speal<er Level
Adjustable range: -IO.OdB to + 10.0dB (0.5dB step)
Defaults:
OdB
(FRL,
FRR,
SWFR, PR.L, PR.R)
-1.0dB
(CNTR, SUR.L, SUR.R, SBL, SBR)
Separately adjusts volume
of
each speaker so that the
sounds fonn speakers are at the same volume at the
listening position. Items to be displayed vary depending
on the number
of
speakers connected.
FR.L I FR.R I
CNTR
I
SUR.L
I SUR.R I
SBL
I SBR I
SWFR I P'R.L I PR.R
feet (ft)
meters (m)
Displays the speaker distance
in
feet.
Displays the speaker distance in meters.
You
can set various items for sound outputs.
• Dynamic Range
Choices: Min/Auto, STD, Max*
Selects the dynamic range adjustment method for
reproducing bitstream signals.
,.,
~<i>:'
• Available items differ depending
on
the "Speaker Configuration" settings
(page 55).
• When only one surround back speaker
is
connected, "SB" appears
instead
of
"SBL" and "SBR".
Adjustable range:
Defaults:
0.30m to 24.00m (I.Oft to 80.0ft)
3.00m (lO.Oft)
(FRL,
FR.R, SWFR, PR.L,
PR.R)
2.60m (8.5ft) (CNTR)
2.40m (8.0ft) (SUR.L,
SURR,
SBL, SBR)
Min/Auto
STD
(Min) Sets the dynamic range suitable for
low volume or a quiet environment, such
as
at night, for bitstream signals except for
Dolby TrueHD signals.
(Auto) Adjusts the dynamic range for Dolby
TrueHD signals based on input signal
information.
Sets the standard dynamic range
recommended for regular home use.
I
57 En