Owner`s manual
Operating
various
settings
for
this
unit
(Setup
menu)
Max Outputs sound without adjusting the
dynamic range
of
the input signals.
•
Lipsync
Adjusts delay between video output and audio output.
HDMI
Auto Lipsync
Choices: Off*,
On
Automatically adjusts output timing
of
audio and video
signals when a
TV
that supports an automatic lip-sync
function
is
connected to this unit.
Off
Select this when the connected TV does not
support the automatic lip-sync function
or
you do not use the automatic lip-sync
function. Set the correction time in "Manual
Delay".
On Select this when the connected TV supports
the automatic lip-sync function. Fine adjust
the correction time
in
"Auto Delay".
Auto Delay
Adjustable range: 0* to
240ms
(I
ms step)
Fine adjust the correction time when
"HDMI
Auto
Lipsync" is set to "On". The actual correction time is
displayed under
in
"Auto Delay" field and an offset time
set by the user in "Offset" field.
Manual Delay
Adjustable range: 0* to
240ms
(I
ms
step)
Manually fine adjusts the correction time. Select this when
the connected
TV
does not support the automatic lipsync
function
or
you set
"HDMI
Auto Lipsync" to
"Off'.
Function
Setup
You
can set various items for HDMI and display.
HOMI
You
can set items for HDMI.
• HDMI Control
Choices:
On,
Off*
Selects on or
off
of
the HDMI control function when a
component that supports the HDMI control function is
connected with this unit. When this parameter
is
set to
"On", this unit output signals input from the HDMI 1-4
jacks to the video monitor even when this unit is on
standby.
On
Enables the HDMI control function.
Off
Disables the HDMI control function.
,0,
~<il:'
• The
@HDMI
THROUGH
indicator lights
up
in the following cases
while this unit
is
on standby.
- when the HDMI control function
is
on
- when the HDMI signal standby-through function
is
currently working
• When "HDMI Control"
is
set to "On", this unit consumes I
to
3
wallS
of
power depending
on
a condition
of
an HDMI signal passing through this
unit.
58
En
• Standby Through
Choices:
On,
Off*
Selects on
or
off
of
output
of
HDMI
signals input from the
HDMI
t-4 jacks to the HDMI
OUT
jack
when this unit is
on standby. When this parameter is set to "On", this unit
output signals input from the HDMI
t-4 jacks to the video
monitor even when this unit is on standby.
On Outputs the HDMI signals to the
HDMI
OUT
jack.
Off
Not output the HDMI signals to the
HDMI
OUT
jack.
,0,
~<il:'
• This parameter
is
not available when "HDMI Control"
is
set to "On".
•
To
enables HDMI signal standby-through output,
anyone
of
the input
sources connected to the HDMI 1-4 jacks must be selected before
switching to standby.
• When "Standby Through"
is
set to "On",
the@HDMI
THROUGH
indicator lights
up.
In
this state, this unit consumes up to 3 watts
of
power
even on standby.
• Audio Output
Choices: Amplifier*, TV, Amplifier +
TV
Selects this unit
or
a component connected to the
HDMI
OUT
jack
of
this unit for reproducing sound signals input
from the HDMI
t -4 jacks.
Amplifier Outputs HDMI sound signals form the
speakers connected to this unit.
TV
Outputs
HDMI
sound signals from the
speakers
of
a
TV
connected to this unit.
Sound output from the speakers connected to
this unit is muted.
Amplifier
+ Outputs HDMI sound signals from the
TV speakers connected to this unit and the
speakers
of
a
TV
pmnected
to
this unit.
Note
• Signal formals
of
audio and visual si8flals output from this unit
to
the TV
vary depending on specifications
of
tfie monitor.
'"
:<il:'
• This parameter is not available when "HDMI Control"
is
set to "On".
• Resolution
Choices:
Through*,
480p,
nop,
1080i, 1080p
Upscales the resolution
of
HDMI
output that is converted
from analog video input signals and output from the
HDMI
OUT
jack.
Not.s
• Resolution
of
the HDMI output converted from
nop
or I080i analog
video signals cannot
be
upscaled.
• When a video monitor
is
connected
to
the HOMI OUT jack
of
this unit,
this unit automatically detects a resolution that the monitor supports. An
asterisk (*) appears on the left
of
the detected resolution.
•
If
this unit cannot detect the resolution that the monitor supports, set
"MON.CHK" in the advanced setup menu to "SKIP" (page 64) and
rry
again.