Owner`s manual
Operating
various
settings
for
this
unit
(Setup menu)
Input Rename
DSP
Parameter
Changes input source names
to
be displayed on the front
panel display.
Selecting a name to be displayed from templates
Press [}]]Cursor
tJ.
/Vto select the input source name to
edit and then press [}]]Cursor
<l
/ c> to select a new
name from the following templates.
-Blu-ray
-DVD
-SetTopBox
-Game
-TV
-DVR
-CD
-CD-R
-Satellite
-VCR
-Tape
-MD
-PC
-iPod
-HDDVD
-"blank"
You
can set parameters for the sound field programs. For
details, see page 50.
Memory
Guard
Choices: Off*,
On
Protects the Setup menu settings against accidental
alteration.
Off Not protect settings.
On Protects the Setup menu settings (except for
"Decode Type"
in
"DSP Parameter" and
"Memory Guard").
Note
Entering an original name
Press [}]]Cursor
tJ.
/Vto select the input source name to
edit and then press
[}]]ENTER.
Enter up to 9 characters
by selecting one character at a time with the following key
operations.
• When this parameter
is
switched to "On",
"Ia
..
appears at the top left
corner
of
the Setup menu screen.
[}]]Cursor
<l
/ C>
[}]]Cursor
tJ.
/V
[}]]ENTER
Selects a character to edit.
Selects a character to enter.
Enters a selected character.
The following characters are available for input.
A to Z, 0 to 9, a to
z,
symbols (#,
*,
-,
+, etc.) and space
Zone2
Sets the maximum volume level and initial volume level
ofZone2.
:\~'-:.
• These parameters are available only when "Extra Speaker Assignment"
is
set to "ZoneZ" (page 56).
• Zone2 Max Volume
Adjustable range:
-30.0dB
to
+15.0dB,
+16.5dB*
(5.0
dB
step)
Sets the maximum volume level
of
Zone2, so that the
volume will not be accidentally increased. For example,
you can adjust the volume between
-80.0
dB and
-5.0
dB
when you set this parameter to "-5.0dB".
• Zone2 Initial Volume
Adjustable range:
Off*,
Mute,
-SO.OdB to
+16.5dB
(0.5
dB
step)
Use this feature to set the volume level
of
Zone2 when the
power
of
Zone2 unit
is
turned on. When this parameter is
set to
"Off',
the volume level used at the time when the
Zone2 unit was set to standby
is
applied.
Note
• If you set "ZoneZ Max Volume" and "ZoneZ Initial Volume", the setting
of
"ZoneZ Max Volume" becomes effective. For example,
if
you set
"ZoneZ Max Volume" to
"-30.0dS"
and "ZoneZ Initial Volume" to
"O.OdS", the volume
is
automatically set to
"-30.0dS"
at the next time
the ZoneZ unit
is
turned on.
60
En