Owner`s manual
..
Controlling
other
components
with
the
remote
control
You
can control external components for a selected input source with the remote control. The keys available for
controlling external components are
as
follows:
•
Defau~t
remote control code settings
lIDSOURCE
POWER
Turns on and off an external component.
The following remote control codes are assigned to input
sources as factory default settings. For a complete list
of
available remote control codes, refer to "List
of
remote
control codes" at the end
of
this manual.
Input source Category Manufacturer
Default
code
[USB)
[DOCK)
DOCK
Yamaha
5011
[TUNER)
Tuner
Yamaha
5007
[SIRIUS)
Tuner
Yamaha
5017
[XM]
Tuner
Yamaha
5009
[MULTI)
2 Press the desired
~Input
selection
key.
3 Press I11INumeric
keys
to enter a remote
control code.
Once the remote control code
is
registered,
IHJTRANSMIT blinks twice.
If
it fails,
IHJTRANSMIT blinks six times. Repeat from
step
1.
Setting
remote
control
codes
Resetting
all
remote
control
codes
You
can control other components
by
setting the
appropriate remote control codes. For a complete list
of
available remote control codes, refer
to
"List
of
remote
control codes" at the end
of
this manual.
You
should perform each step within I minute after the
previous step.
1 Press IliICODE
SETon
the remote control
using a pointed object such as the tip of a
ballpoint pen.
IHJTRANSMIT blinks twice.
,',
~<i':'
• An external component controlled
by
the remote conlrol
is
automatically
selected according
10 selection
of
the scenes (page 22).
"-"
indicates
no
assignmenl
Default
code
2018
Yamaha
ManufacturerCategory
Blu-ray
Disc
Input source
[HDMI2)
[HDMI3)
[HDMII)
,',
~(j)':.
•
You
can use [i1]TV
control
keys
only for controls
of
TV
regardless
of
selected input sources.
•
You
need to set the remote control code first 10 control external
components.
• The remote control keys for controlling external components are
available only when the external components have corresponding control
keys.
I]]]Cursor,
ENTER,
RETURN
Operates the menus
of
external components.
IITlExtern,al
component
operation
keys
Function as a recording or playback key
of
an external
component, or a menu display
key.
I11INumeriic
keys
Function as numeric keys
of
an external component.
Il1ITV
control
keys
INPUT
Switches visual inputs
of
TV
MUTE
Mutes audio
of
TV
TV
VOL
~,.I-
Controls the volume
of
TV
TV
CH
+f.-
Switches channels
of
TV
POWER
Turns on and off TV
~DISPL'~Y
Switches between the screens
of
external components.
[HDMI4)
[AV
I]
You
can reset all remote control codes
to
the factory
default settings.
[AV2)
[AV
3)
[AV4)
[AV5)
[AV6)
[AUDIO
I)
[AUDl02)
[V-AUX)
[PHONO)
CD
Yamaha
5013
1 Press IliICODE
SET
on
the remote control
using a pointed object such as a tip of a
ballpoint pen.
IHJTRANSMIT blinks twice.
2 Press
[IDON
SCREEN.
3 Press I11INumeric
keys
to enter "9981".
Once the initialization is complete, IHJTRANSMIT
blinks twice.
If
it fails, IHJTRANSMIT blinks six
times. Repeat from step
1.
I
63 En