Owner`s manual
Advanced
setup
In
the advanced setup menu, you can set basic operations
of
this unit, such as on and off
of
a bi-amp connection, or
initialize user settings.
1 Set
this
unit
to
standby.
2 While
holding
down
@STRAIGHT
on the
front
panel, press
®MAIN
ZONE
ON/OFF.
Keep holding down
@STRAIGHT
until
"ADVANCED SETUP" appears on the front panel
display.
Choices:
DSP
PARAM, VIDEO, ALL, CANCEL*
Initializes various settings stored in this unit.
You
can
select
an
initialization method from the following.
DSP PARAM:
All
parameters
of
sound field
programs
VIDEO Video conversion settings (resolution!
aspect)
in
the Setup menu and the GUI
display position
ALL All
CANCEL.
Cancellation
of
initialization
,"
~"'~
• Set values are placed
in
XXX
of
the following parameters on
an
actual display screen.
3 Rotate the
@PROGRAM
selector
to
select
the parameter you want
to
change.
The default setting are marked with "*".
FI
Pt'l
UPD!=tTE
Updates the firmware
of
this unit.
To
update the firmware,
select "FIRM UPDATE" and then press
@STRAIGHT.
Notes
Updating the firmware
4 Press
@STRAIGHT
repeatedly
to
change
the selected parameter setting,
To
change other settings, repeat steps 3 and 4.
• Do not use this feature unless you need to update the firmware.
• Be sure to read information supplied with updates before updating the
firmware.
5 Press
®MAIN
ZONE
ON/OFF
to
set
this
unit
to
standby.
The settings you made are reflected next time you
turn on this unit.
You
can check the firmware
of
this unit and update the
firmware using the USB port on the front panel.
Select the following parameter
in
step 3 above.
I:;
r::-
-I'
i iP
-
[..
_.
HD
I.)
R
t,~
CED
Choices:
101*,102
Sets a remote control ID. When using multiple
Yamaha
AV
receivers, you can operate them with a
single remote control
by
setting the receiver IDs to
the same setting.
Choices:
6QMIN, 8QMIN*
Selects output impedance
of
this unit according to
connected speakers. When you connect 4-ohm
speakers to the FRONT speaker terminals, set
"SP
IMP." to "6QMIN.".
PE
t'1Cl
TEl
D -
::.::
::.::
::<
Displays the firmware
of
this unit.
Choices:
RESET,
CANCEL*
Resets Parental lock cord when using SIRIUS
Satellite tuner.
Choices:
ON, OFF*
Switches on and off
of
bi-amp connection
of
main
speakers. For bi-amp connection, see page
12.
SC:Et·~E
I
r::
-::.::::.::::.::
Choices:
ON*,
OFF
Selects whether or not to transmit the control signals
to
an external component connected to the REMOTE
OUTjack on this unit when BDIDVD or CD SCENE
function is selected.
Setting a remote control
10
Two IDs are provided for the remote control
of
this unit.
If
another Yamaha amplifier is
in
the same room, setting a
different remote control ID
to
this unit prevents unwanted
operation
of
the other amplifier.
"IDI" is set for both the main unit and remote control
by
default.
If
you have changed the remote control ID, make
sure that you select the same ID for the main unit
in
the
the advanced setup menu.
1 Press
!IIDCODE
SET
on the remote control
using a pointed object such as the
tip
of
a
ballpoint pen.
IHITRANSMIT
blinks twice.
Choices:
YES*, SKIP
Adds upscaling limitation on output signals to a video
monitor connected to this unit via the HDMI OUT
jack.
2 Press
[IDON
SCREEN.
64 En