Owner`s manual

·YAMAHA
Additional feature
DO
RX-V1065
Now you can select the video to be output when "AUDIO I" or "AUDI02" is selected as the input source.
For example, if you want to use an external component with analog audio and component video (or composite) output
jacks; connect the analog audio output jacks
of the external component to the AUDIO I or AUDIO 2 jacks of this unit
while making a video connection (component video
or composite).
Then follow the procedure below to select the video to be output when "AUDIO
I" or "AUDI02" is selected as the input
source.
1 Rotate the@INPUT selector (or press
@]AUDIO 1 or @]AUDIO
2) to select
"AUDI01" or "AUDI02" as the input source.
2 Press aIDOPTION on the remote control.
The Option menu for "AUDIO I" or "AUDI02" is
displayed.
3 Press IJ]]Cursor /;, 1 \j to select "Video Out"
and then press IJ]]ENTER.
HU1J1U i
!.) 1 !~i E: I:: ::
4 Press IJ]]Cursor <11 C> to select a video input
jack to be used when
"AUDI01" or "AUDI02"
is selected as the input source and then
press IJ]]ENTER.
- AVI-2 (COMPONENT VIDEO)
- AV3-6 (VIDEO)
- V-AUX (VIDEO)
- Off (no video output)
,0,
~<i>~
• "orf' is selected by default.
5 To exit the Option menu, press aIDOPTION.