Get To Know Manual

Getting to Know Your RELAY
6
Remote Keyless Entry (RKE)
REMOTE KEYLESS ENTRY
FEATURES
This feature allows you to lock or unlock
your vehicle’s doors, open or close the
power sliding door(s) (if equipped) and
sound an alarm using the RKE transmit-
ter (key fob).
Locking the Doors
• Press on the RKE transmitter.
Unlocking the Doors
• Press on the RKE transmitter
once to unlock the driver’s door.
Press the button again within five
seconds to unlock all doors.
Sounding the Panic Alarm
• Press on the RKE transmitter
when the ignition is turned off. The
horn will sound and the parking
lamps and headlamps will flash for up
to two minutes. To cancel the panic
alarm, press the button again or
insert the key in the ignition and turn
it to the Run position.
Opening and Closing the Power
Sliding Door(s) (if equipped)
• Press on the RKE transmitter
to open the passenger-side power
sliding door. Press the button again to
close the door.
• Press on the RKE transmitter to
open the driver-side power sliding
door. Press the button again to close
the door.
See Section 2 of your Owner Manual.
Remote Start (if equipped)
This feature allows you to start the
engine from outside the vehicle by using
the RKE transmitter. (Normal remote
start transmitter range is within 196 feet
of the vehicle.) You can also preset the
vehicle’s climate control system to heat
or cool the vehicle interior before getting
in.
The engine will run for about 10 minutes
before turning itself off, but can be
extended 10 minutes more by perform-
ing another remote start sequence
at any time. After two consecutive
remote starts, no additional remote
starts are allowed until the vehicle has
been started with the ignition key.
The remote start system will not operate
if the doors, hood or liftgate is open or if
the key is in the ignition.
Starting the Vehicle
1. Aim the RKE transmitter at the
vehicle.
2. Press and release the (Lock)
button on the RKE transmitter.
3. Immediately press and hold the
(Remote Start) button for about two
seconds.