POWERPROF User Manual SCP-9000
POWERPROF SCP-9000
We congratulate you for choosing Sauber Commercial Powerprof, the first-class commercial cleaning system. Before operating the Sauber Powerprof please read this instruction manual carefully and keep it for future reference.
Safety Instructions Please read all the instructions attentively before using this vacuum. Your new Sauber Powerprof is a high quality, reliable, innovative product that has been designed in Switzerland and made in Europe with the most modern technology. The Sauber Powerprof comes with a powerhead that enables you to clean deep down dirt and dust from carpets.
• Do not pick up liquid, dry use only. • Never clean the vacuum cleaner and all its electrical parts, especially the electrical connections, with water or liquid cleaners. • Maintenance and repairs may only be undertaken by authorized Sauber customer service personnel. Use only ORIGINAL Sauber spare parts and accessories. • Never attempt to make any modifications electrically to the vacuum cleaner.
C B G Q J K I H D N M F L E O 6 R A P POWERPROF SCP-9000
Overview A On/Off foot pedal B Flexible Current Carrying Hose C Powerhead on/off switch D Powerhead E Power Light F Powerhead Height Adjustment G Telescopic Tube H Swivel neck I Side Parking Position J Power Cable K Storage and Accessory Compartment L Bumper Protection M Dust Bag Holder (inside canister) N Filter Holder (inside canister) O Combination Floor Brush P Dusting/Upholstery Combo Brush Q Speed Control R Powerhead Foot Pedal POWERPROF SCP-9000 7
Before You Begin 1. Do not operate the vacuum cleaner too close to heaters, radiators, and other hot surfaces. 2. Before inserting the plug into the wall, make sure your hand is dry. 3. Before turning on the vacuum cleaner, remove any large or sharp objects from the floor or cleaning surface in order to prevent damage to the filter. 4. When you want to pull the plug from the wall, do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. 5.
Assembly The cleaner should be switched off and disconnected from the mains supply before you start to assemble. 1 3 5 Push the hose into the hose inlet on the canister. Connect the telescopic tube to the combination floor tool or the powerhead. Take the cable from the storage compartment and connect to the mains power supply. POWERPROF SCP-9000 2 4 6 Connect the handle on the hose to the telescopic tube. To extend the length of the telescopic tube, slide the lock down and pull the tube down.
Operation From the electronic control handle 1 10 To operate the powerhead, press the “brush” button on the electronic control handle to turn On/Off.
ET2.1 Powerhead Carpets only keep their appearance when brushed thoroughly during vacuuming. 1 Powerhead 2 Brush height adjustment 3 Swivel neck 4 Connection plug 5 Release button 6 Brush indicator light 7 Power light 8 9 3 2 1 10 8 9 11 4 5 Brush roller cover 2 Brush roller release button 3 10 1 10 Foot Pedal 6 11 Access door 7 DANGER and Live Parts Within Operating Instructions 3 10 The use of a powerhead is recommended for the optimal cleaning of carpets.
Selecting the correct brush height 3 10 Start at setting 4 on the height adjuster (2) and adjust according to the indicator light (6+7). The electronic brush control constantly monitors the status of the brush, communicating the status through the lights on top. Green (7) and red (6): The brush is not fully engaged in the carpet. The height adjustment should be lowered. If the height adjustment is at its lowest setting, the brush is worn and needs to be replaced. This detail applies only to carpet.
Accessories Dusting/upholstery combo brush The small dusting/upholstery brush can be used in two ways. 1 Use the dusting brush for dusting corners and crevices. You can also use this when vacuuming curtains – but reduce the vacuum power manually. 2 Use the upholstery brush to vacuum upholstery and stairs. Combination brush The combination brush can be used on hard floors and carpets. 1 3 You can manually set the hard floor function by pushing the slider to the front.
Replacement of consumables (Dust bag and filters): 1 3 5 Disconnect the cleaner from the mains power supply. To change the dust bag (cloth or synthetic), remove the bag holder and put it aside. Remove the dust bag and replace with a new one. Secure the new dust bag with the bag holder once again. Take the new carbon filter and click into the HEPA H13 filter frame. Ensure that the filters are correctly in place. Lock the HEPA H13 filter handle in position.
Technical Data Double insulation CE conforms to the EU directive for CE certification. Safety approved according to AS/NZS60335.1 and AS/NZS60335.2.2. Product code: 11300100 Supply voltage: 220-240V/50Hz Nominal power: 1100W Maximum power: 1200W + Powerhead 150W Powerhead speed: 2700rpm Weight: 6.
P AR Y 2 YEAR W Sauber Commercial Powerprof M 2 Year Warranty MI RE U RAN T Conditions of Warranty Your Sauber Powerprof has a 2 year parts and labour warranty against product defects and failures when the product is used in accordance with the terms and conditions of this warranty statement. This warranty commences from the original date of purchase and is not transferable; please retain your original proof of purchase for any warranty claims.
