Operation Manual

9
SCP-9000
POWERPROF
Assembly
The cleaner should be switched off and disconnected from the
mains supply before you start to assemble.
Push the hose
into the hose inlet
on the canister.
Connect the
handle on the
hose to the
telescopic tube.
Connect the
telescopic tube to
the combination
floor tool or the
powerhead.
To extend the length
of the telescopic
tube, slide the lock
down and pull the
tube down. To
reduce the extension,
slide the lock up.
Take the cable
from the storage
compartment and
connect to the
mains power supply.
1
2
3 4
5
Start the cleaner
by pressing the
On/Off foot pedal
switch.
6