Instructions / Assembly

å
Separate the EXTENSION SLIDES (II) from the EXTENSION RAILS (HH)
as shown in the upper diagram below. Be prepared, the parts are greasy.
å
Fasten the EXTENSION RAILS (HH) to the ENDS (A and B) and
UPRIGHTS (C and D). Use eight GOLD 5/16" FLAT HEAD SCREWS (FFF).
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in
the enlarged diagram. Then, slide the inner cartridge of the EXTENSION
RAIL out to fi nd the other hole that lines up with the hole in the ENDS and
UPRIGHTS. Turn a SCREW into this hole.
Step 6
409042www.sauder.com/services
Page 11
HH
HH
HH
HH
D
C
B
A
HHII
Push the black lever in and pull the SLIDE from the RAIL.
Open end
Open end
Open end
Open end
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
FFF
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS