Instructions / Assembly

Step 19
å
First, lay the LAPTOP PAD (DDD) so the velcro attached
to the pad is facing up.
å
Next, peel o the paper from the adhesive side.
å
Finally, fl ip the pad over and press it fi rmly onto the center
of the LAPTOP SHELF (Q).
å
Fasten the BLACK DRAWER SLIDES (MM and NN) to the
SHELF MOLDINGS (BB). Use four BROWN 1" FLAT
HEAD SCREWS (LLL).
å
NOTE: The DRAWER SLIDES are marked "DRAWER
RIGHT" and "DRAWER LEFT" for easy identifi cation.
å
Lay the LAPTOP SHELF (Q) with the LAPTOP
PAD (DDD) facing down in the notched edges
of the SHELF MOLDINGS (BB).
409043 www.sauder.com/servicesPage 24
Q
BB
DDD
MM
NN
BB
Q
1. With the velcro centered, peel o the
paper so the adhesive side is facing up.
2. Carefully fl ip the pad over and press it
fi rmly onto the LAPTOP SHELF.
BROWN 1" FLAT HEAD SCREW
(4 used in this step)
LLL
Notched edge