Instructions / Assembly

å
Fill the holes in the LEFT END (E3) 1/4 to 1/2 full with
GLUE (54M). Be sure to fi ll the second and fourth holes
from the rounded edge as shown in the lower diagram.
å
Fasten the LEFT END (E3) to the FRONT PANELS (G3
and H3) and BACK PANEL (I3). Tighten four HIDDEN
CAMS. Wipe away the excess glue.
å
NOTE: Be sure the WOOD DOWELS in the PANELS insert
into the holes in the LEFT END.
Step 8
411222 www.sauder.com/servicesPage 12
Arrow
Minimum
190 degrees
Maximum
210 degrees
E3
E3
G3
H3
I3
Left End
Rounded edge
Rounded edge
Roller end
Roller end
54M
Fill the holes 1/4 to 1/2 full with GLUE.
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely di cult.
Caution
!