Instructions / Assembly

Step 15
411843 www.sauder.com/servicesPage 20
å
Refer to the enlarged diagram to identify the parts
on the HINGES.
å
The DOORS may need some adjustments. Follow
the text below to make needed adjustments.
å
DOOR ADJUSTMENTS:
To adjust the DOORS from side to side (horizontal),
turn the adjusting screw in or out.
å
To adjust the DOORS up and down (vertical), loosen
both vertical adjustment screws. Move the DOORS
up or down to the desired location. Tighten the
screws after making adjustments.
å
To adjust the DOORS in or out (depth), loosen the
mounting screw one turn and move the DOORS in
or out, as needed. Tighten the mounting screw after
making adjustments.
Adjusting screw (horizontal)
Mounting screw (depth)
(vertical adjustment)