Instructions / Assembly

å
Carefully turn your unit over onto its front edges. Unfold
the BACK (K) and lay it over your unit.
å
Make equal margins along all four edges of the BACK (K). Push
on opposite corners of your unit if needed to make it “square”.
å
Fasten the BACK (K) to your unit using the NAILS (TT).
å
Fasten the FOOT BASES (KK) to the BOTTOM (F). Use
eight SILVER 5/8" FLAT HEAD SCREWS (PP). Then, push
the FEET (JJ) into the FOOT BASES (KK).
å
NOTE: Turn the adjustable ends of the ADJUSTABLE
FEET completely in. Final adjustments will be made after
the unit is standing upright.
å
Fasten the METAL BRACKET (W) to the BOTTOM (F)
and FRONT SKIRT (Q). Use two BLACK 9/16" LARGE
HEAD SCREW (RR).
Step 24
LARGE DOOR ON RIGHT
KK
JJ
W
NAIL
(72 used for the BACK)
TT
BLACK 9/16" LARGE HEAD SCREW
(2 used for the ANGLE BRACKET)
RR
SILVER 5/8" FLAT HEAD SCREW
(8 used for the FOOT BASE)
PP
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
These holes must be here.
These holes must
line up over the
UPRIGHT (D).
411965 www.sauder.com/servicesPage 28
F
Q
Turn completely in.