Instructions / Assembly

Step 12
å
Fasten the LOWER PLINTHS (DD) to the BRACE (J). Use four
BLACK 1-1/4" FLAT HEAD SCREWS (FFF).
å
Fasten the BASE (K) and BOTTOM MOLDING (BB) to the
BRACE (J). Use four BROWN 1" FLAT HEAD SCREWS (HHH).
412116 www.sauder.com/servicesPage 18
J
BB
DD
DD
K
Be sure the END MOLDING is
centered against the HALF DISK
on the LOWER PLINTH (DD).
Flat end
BROWN 1" FLAT HEAD SCREW
(4 used for the BOTTOM MOLDING)
HHH
BLACK 1-1/4" FLAT HEAD SCREW
(4 used for the LOWER PLINTHS)
FFF
Don't worry. It isn't
Rome. This can be built
in a day.