sauder.com WARNING CHOKING HAZARD - Small Parts Not for children under 3 years. Adult assembly required. Desk Carson Forge Collection | Model 412920 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. Prefer the phone? Call 1-800-523-3987. Share your journey! PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Table of Contents Part Identification Assembly Tools Required 2-3 Hardware Identification No. 2 Phillips Screwdriver Tip Shown Actual Size 4-5 Assembly Steps 6-28 Hammer Français 29-32 Español 33-36 Safety 37-38 Warranty Not actual size Skip the power trip. This time. 39 Now you know our ABCs. Part Identification å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other.
Part Identification W H E A Z U G B D I M75 Y X F V D77 D36 C D716 J D37 D34 D121 D48 D78 D991 D716 R2 D49 N D35 M67 www.sauder.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit. XX BLACK 2-1/4" FLAT HEAD SCREW - 3 YY ZZ SILVER 1-1/8" FLAT HEAD SCREW -2 AAA GOLD 1" MACHINE SCREW - 2 BBB BLACK 7/8" MACHINE SCREW - 2 CCC BLACK 9/16" FLAT HEAD SCREW - 2 DDD BROWN 9/16" LARGE HEAD SCREW - 14 EEE SILVER 1/2" MACHINE SCREW - 5 FFF GOLD 5/16" FLAT HEAD SCREW - 24 GGG NAIL - 20 SILVER 2" FLAT HEAD SCREW - 4 30S BLACK 1-9/16" FLAT HEAD SCREW - 13 www.sauder.
Look for this icon. It means a video assembly tip is available at www.sauder.com/services/tips Step 1 å å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. Scan this QR code or go to this address: http://qr.sauder.com/?ID=1591 to watch a video on how to assemble your unit. Push twenty-four HIDDEN CAMS (1F) into the ENDS (A and C), UPRIGHT (D), BOTTOM (F), MODESTY PANEL (G), BRACE (I), and DRAWER BRACE (M67).
Step 2 å å Turn thirteen CAM SCREWS (8F) into the LEGS (U, V, X, and Y). NOTE: Be sure to use the exact holes shown. Remember: Righty tighty. Lefty loosey. 8F (13 used) 8F X V U Y www.sauder.
Step 3 å Fasten the CORNER ACCENTS (UU) to the LEGS (U, V, and Y). Use two BLACK 7/8" MACHINE SCREWS (BBB) through the LEGS (U and Y). Use a SILVER 1/2" MACHINE SCREW (EEE) through the LEFT FRONT LEG (V). BBB BLACK 7/8" MACHINE SCREW (2 used in this step) U UU Y UU V EEE SILVER 1/2" MACHINE SCREW (1 used in this step) Angled edge Page 8 412920 www.sauder.
Step 4 å Fasten the RIGHT FRONT LEG (U) to the RIGHT END (A) and the CENTER LEG (Y) to the UPRIGHT (D). Tighten six HIDDEN CAMS. Edge with CAM DOWELS Angled edge U S HI urfa DD ce EN wi CA th M S A S HI urfa DD ce EN wi CA th M S D Y Angled edge 1 www.sauder.
Step 5 å å Carefully turn the RIGHT END (A) over. å Slide the END MOLDING (M75) onto the END (A). Line up the groove in the MOLDING over the heads of the SCREWS in the END and slide it until it is against the RIGHT FRONT LEG (U). å Fasten the RIGHT REAR LEG (W) to the RIGHT END (A). Use three BLACK 2-1/4" FLAT HEAD SCREWS (XX). Turn two BLACK 9/16" FLAT HEAD SCREWS (CCC) into the END (A) until the shoulders of the SCREWS rest on the surface of the END.
Step 6 å First, fill the holes in one edge of the UPPER LEFT END (B) 1/4 to 1/2 full with GLUE (KK). Then, insert the WOOD DOWELS (PP) into the holes. Wipe away the excess GLUE. å Repeat adding GLUE and inserting the WOODEN DOWELS in the short edges of the LOWER LEFT END (C) and BRACE (I) as shown below. å Now, fasten the BRACE (I) to UPPER LEFT END (B). Use two SILVER 1-1/8" FLAT HEAD SCREWS (ZZ). ! Caution Inspect the parts thoroughly before assembling.
Step 7 å First, fill the four holes in the edge of the LEFT REAR LEG (X) 1/4 to 1/2 full with GLUE (KK). Then, insert the WOOD DOWELS in the ENDS (B and C) and BRACE (I) into the holes of the LEG. Wipe away the excess GLUE. å NOTE: Be sure the CAM SCREWS insert into the holes in the short edges of the LOWER LEFT END (C) and BRACE (I). å Fasten the LEFT REAR LEG (X) to the LOWER LEFT END (C) and BRACE (I). Tighten two HIDDEN CAMS.
Step 8 å Fasten two CABINET RIGHTS (40CA) and two CABINET LEFTS (40CB) to the RIGHT END (A) and UPRIGHT (D). Use eight GOLD 5/16" FLAT HEAD SCREWS (FFF) through holes #1 and #3. Roller end Edge with CAM DOWELS 1 2 3 4 1 Angled edge 2 Su HI rfa DD ce EN wit CA h M S A 4 3 4 3 2 1 4 3 Su HI rfa DD ce EN wit CA h M S D 2 1 Roller end FFF GOLD 5/16" FLAT HEAD SCREW (8 used in this step) Angled edge www.sauder.
Step 9 å å Carefully flip the UPRIGHT (D) over. å Fasten the remaining CABINET RIGHT (40CA) and CABINET LEFT (40CB) to the BRACE (I) and EXTENSION BLOCK (Z). Use four GOLD 5/16" FLAT HEAD SCREWS (FFF) through holes #1 and #3. Fasten the EXTENSION BLOCK (Z) to the UPRIGHT (D). Use two SILVER 2" FLAT HEAD SCREWS (YY).
Step 10 å å Insert a WOODEN DOWEL (PP) into the hole in the TOP (E) å NOTE: Be sure the WOODEN DOWEL inserts into the hole in the LEG. å Fasten the MODESTY PANEL (G) to the LEFT REAR LEG (X). Tighten three HIDDEN CAMS. Caution Fasten the BRACE (I) to the TOP (E). Tighten two HIDDEN CAMS. Do not stand the unit upright without the BACK fastened. The unit may collapse. X G h wit MS e A c rfa C Su DEN D HI I PP Su rfa ce wi th ho le s E Curved edge Caution Risk of damage or injury.
Step 11 å Fasten the UPRIGHT (D) to the TOP (E). Tighten two HIDDEN CAMS. å Fasten the UPRIGHT (D) to the MODESTY PANEL (G). Use two SILVER 2" FLAT HEAD SCREWS (YY). å Fasten the METAL BRACE (TT) to the LEFT LEGS (V and X). Use four BROWN 9/16" LARGE HEAD SCREWS (DDD). Maximum 210 degrees Arrow Minimum 190 degrees YY SILVER 2" FLAT HEAD SCREW (2 used in this step) X G TT V Su HI rface DD w EN ith CA MS D E DDD BROWN 9/16" LARGE HEAD SCREW (4 used for the METAL BRACE) Page 16 412920 www.
Step 12 å Fasten the BOTTOM (F) to the UPRIGHT (D). Tighten two HIDDEN CAMS. å Fasten the RIGHT END (A) to the BOTTOM (F) and TOP (E). Tighten four HIDDEN CAMS. Maximum 210 degrees Arrow Minimum 190 degrees Angled edge S HI urfa DD ce EN wi CA th M S F D E A Finished edge www.sauder.
Step 13 å å Push a FOOT (QQ) over the bottom edge of each LEG (U, V, W, X, and Y). Don't worry. It isn't Rome. This can be built in a day. With a hammer, tap a TACK GLIDE (LL) through the holes of the FEET (QQ). LL QQ X V W Y U Page 18 412920 www.sauder.
Step 14 å Carefully turn your unit over onto its front edge and lay the BACK (H) over the large opening. å å Fasten the BACK (H) to your unit using the NAILS (GGG). Caution Do not stand the unit upright without the BACK fastened. The unit may collapse. NOTE: Be sure the BACK is not hanging over the top surface of the TOP. GGG NAIL (20 used in this step) su rfa ce H Fi ni sh ed on e .
Step 15 å Pull the PENCIL DRAWER FRONT BRACKETS (OO) apart and slide them into the grooves in the PENCIL DRAWER SIDES (D34 and D35). å NOTE: The PENCIL DRAWER FRONT BRACKETS are marked "RH" and "LH" for easy identification. å Fasten the PENCIL DRAWER FRONT (R2) to the PENCIL DRAWER FRONT BRACKETS (OO). Use two BROWN 9/16" LARGE HEAD SCREWS (DDD). å Slide the LARGE DRAWER BOTTOM (D991) into the grooves in the PENCIL DRAWER SIDES (D34 and D35) and PENCIL DRAWER FRONT (R2).
Step 16 å Fasten the DRAWER BRACE (M67) to the PENCIL DRAWER FRONT (R2). Tighten the HIDDEN CAM. å Fasten the PENCIL DRAWER BACK (D121) to the PENCIL DRAWER SIDES (D34 and D35) and DRAWER BRACE (M67). Use five BLACK 1-9/16" FLAT HEAD SCREWS (30S). å Maximum 210 degrees Arrow Minimum 190 degrees NOTE: Be sure the LARGE DRAWER BOTTOM (D991) inserts into the groove in the PENCIL DRAWER BACK (D121). 1st M67 D34 Start each screw a few turns before completely tightening any of them.
Step 17 å Fasten a DRAWER RIGHT (40CC) and a DRAWER LEFT (40CD) to the PENCIL DRAWER SIDES (D34 and D35). Use four GOLD 5/16" FLAT HEAD SCREWS (FFF) through holes #2 and #4. å Fasten a BACKPLATE (WW) and KNOB (VV) to the PENCIL DRAWER FRONT (R2). Use two GOLD 1" MACHINE SCREWS (AAA). Roller end AAA 1 GOLD 1" MACHINE SCREW (2 used in this step) 2 4 3 D35 Roller end R2 D34 1 2 4 WW 3 VV FFF GOLD 5/16" FLAT HEAD SCREW (4 used in this step) Page 22 412920 www.sauder.
Step 18 å Pull the FILE DRAWER FRONT BRACKETS (MM) apart and slide them into the grooves in the FILE DRAWER SIDES (D48 and D49). å NOTE: The FILE DRAWER FRONT BRACKETS are marked "RH" and "LH" for easy identification. å Fasten the LOWER DRAWER FRONT (N) to the FILE DRAWER FRONT BRACKETS (MM). Use four BROWN 9/16" LARGE HEAD SCREWS (DDD). å Slide the SMALL DRAWER BOTTOM (D716) into the grooves in the FILE DRAWER SIDES (D48 and D49) and LOWER DRAWER FRONT (N). Tap down with your screwdriver and hammer.
Step 19 å Fasten the FILE DRAWER BACK (D78) to the FILE DRAWER SIDES (D48 and D49). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S). å NOTE: Be sure the SMALL DRAWER BOTTOM (D716) inserts into the groove in the FILE DRAWER BACK (D78). Start each screw a few turns before completely tightening any of them. 30S BLACK 1-9/16" FLAT HEAD SCREW (4 used in this step) D78 D48 D716 D49 Page 24 412920 www.sauder.
Step 20 Push down 1 With the palm of your hand, tap the DRAWER BOTTOM down into the groove. 2 NN Un su finis rfa he ce d J D37 D716 D36 D36 DDD å Pull the DRAWER FRONT BRACKETS (NN) apart and slide them into the grooves in the SMALL DRAWER SIDES (D36 and D37). You may need to gently tap them in with a hammer. å NOTE: The DRAWER FRONT BRACKETS are marked "RH" and "LH" for easy identification. å Fasten the UPPER DRAWER FRONT (J) to the DRAWER FRONT BRACKETS (NN).
Step 21 å Fasten a DRAWER RIGHT (40CC) and a DRAWER LEFT (40CD) to the FILE DRAWER SIDES (D48 and D49). Use four GOLD 5/16" FLAT HEAD SCREWS (FFF) through holes #2 and #4. å Repeat this step for the other drawer. Roller end 1 2 4 3 D49 D48 Roller end 1 2 3 4 FFF GOLD 5/16" FLAT HEAD SCREW (8 used in this step) Page 26 412920 www.sauder.
Step 22 å Push the FILE GLIDES (4B) onto the top edges of the FILE DRAWER SIDES (D48 and D49). å Fasten the PULLS (SS) to the DRAWER FRONTS (J and N). Use four SILVER 1/2" MACHINE SCREWS (EEE). EEE SILVER 1/2" MACHINE SCREW (4 used for the PULLS) 4B 4B D49 N D48 SS J SS www.sauder.
Step 23 å å Carefully stand your unit upright. å To make adjustments to the drawer, loosen the SCREWS in the DRAWER FRONT BRACKETS, make needed adjustments, and tighten the SCREWS. å å Push a CAM COVER (II) onto each HIDDEN CAM. å This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry. To insert the drawer into your unit, tip the front of the drawer down and drop the rollers on the drawer behind the rollers on the unit.
Modèle 412920 Utilisez les instructions d’assemblage en français avec les schémas étape par étape du manuel d’instruction en anglais. Chaque étape en français correspond à la même étape en anglais. La pièce devant être attachée à l’élément est représentée en gris sur les schémas de chaque étape pour plus de précision. Comparer la “Liste de pièces” ci-dessous avec la “PART IDENTIFICATION” du manuel en anglais pour vous familiariser avec les pièces avant l’assemblage.
ÉTAPE 1 ÉTAPE 6 Ne pas serrer les EXCENTRIQUES ESCAMOTABLES dans cette étape. Attention: Examiner bien les pièces avant d'assembler. Il est difficile de séparer des pièces une fois encollées. Assembler l'élément sur un sol à moquette ou sur le carton vide pour éviter d'endommager l'élément ou le sol. Enfoncer vingt-quatre EXCENTRIQUES ESCAMOTABLES (1F) dans les EXTRÉMITÉS (A et C), le MONTANT (D), le DESSOUS (F), le VOILE DE FOND (G), l'ENTRETOISE (I), et l'ENTRETOISE DE TIROIR (M67).
ÉTAPE 9 ÉTAPE 13 Avec précaution, retourner le MONTANT (D). Mettre un PIED (QQ) sur le chant inférieur de chaque PIED (U, V, W, X et Y). Fixer le BLOC D'EXTENSION (Z) au MONTANT (D). Utiliser deux VIS ARGENTÉES TÊTE PLATE 51 mm (YY). Fixer lÉLÉMENT DROITE (40CA) et lÉLÉMENT GAUCHE (40CB) restantes sur l’ENTRETOISE (I) et le BLOC D’EXTENSION (Z). Utiliser quatre VIS DORÉES TÊTE PLATE 8 mm (FFF) à travers les trous nº 1 et nº 3.
ÉTAPE 17 ÉTAPE 21 Fixer un jeu de TIROIR DROITE (40CC) et TIROIR GAUCHE (40CD) sur les CÔTÉS DE TIROIR À CRAYONS (D34 et D35). Utiliser quatre VIS DORÉES TÊTE PLATE 8 mm (FFF) à travers les trous nº 2 et nº 4. Fixer un jeu de TIROIR DROITE (40CC) et TIROIR GAUCHE (40CD) sur les CÔTÉS DE TIROIR POUR DOSSIERS (D48 et D49). Utiliser quatre VIS DORÉES TÊTE PLATE 8 mm (FFF) à travers les trous nº 2 et nº 4. Fixer une FERRURE (WW) et une POIGNÉE (VV) au DEVANT DE TIROIR À CRAYONS (R2).
Modelo 412920 Use estas instrucciones de ensamblaje en español junto con las figuras paso-a-paso provistas en el folleto inglés. Cada paso en español corresponde al mismo paso en inglés. Se destacan las figuras de cada paso con una tonalidad oscura para mostrar precisamente cual parte se debe montar a la unidad. Compare la “Lista de Part” abajo con la “Part Identification” en el folleto en inglés para familiarizarse con Las partes de ensamblaje.
PASO 1 PASO 6 No apriete los EXCÉNTRICOS ESCONDIDOS en este paso. Precaución: Revise las partes cuidadosamente antes de ensamblar. La separación de las piezas ya pegadas es muy difícil. Ensamble la unidad sobre un piso alfombrado o sobre el cartón vacío para evitar rayar la unidad o el piso. Empuje veinticuatro EXCÉNTRICOS ESCONDIDOS (1F) dentro de los EXTREMOS (A y C), del PARAL (D), del FONDO (F), del VELO DE FONDO (G), de la RIOSTRA (I), y de la RIOSTRA DE CAJÓN (M67).
PASO 9 PASO 13 Cuidadosamente vuelva el PARAL (D) al revés. Introduzca una PATA (QQ) sobre el borde inferior de cada PATA (U, V, W, X y Y). Fije el BLOQUE DE EXTENSIÓN (Z) al PARAL (D). Utilice dos TORNILLOS PLATEADOS DE CABEZA PERDIDA de 51 mm (YY). Fije el GABINETE DERECHO (40CA) y el GABINETE IZQUIERDO (40CB) restantes a la RIOSTRA (I) y al BLOQUE DE EXTENSIÓN (Z). Utilice cuatro tornillos DORADOS de cabeza PERDIDA de 8 mm (FFF) a través de los agujeros No. 1 y No. 3.
PASO 17 PASO 21 Fije una serie de CAJÓN DERECHO (40CC) y el CAJÓN IZQUIERDO (40CD) a los LADOS DEL CAJÓN PARA LÁPICES (D34 y D35). Utilice cuatro tornillos DORADOS de cabeza PERDIDA de 8 mm (FFF) a través de los agujeros No. 2 y No. 4. Fije una serie de CAJÓN DERECHO (40CC) y el CAJÓN IZQUIERDO (40CD) a los LADOS DEL CAJÓN DE ARCHIVERO (D48 y D49). Utilice cuatro tornillos DORADOS de cabeza PERDIDA de 8 mm (FFF) a través de los agujeros No. 2 y No. 4.
WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded shelves and drawers. • Improper loading can cause the product to be top-heavy. • Risk of injury. • Top-heavy furniture can tip over. • Overloaded shelves and drawers can break. • Never exceed the weight limits shown in the instructions.
ADVERTENCIA Por favor use el mobiliario correcta y seguramente. El mal uso puede causar riesgos de seguridad o daño a las unidades o artículos domésticos. Cuidadosamente lea la tabla a continuación. Esté alerto de: Puede ocurrir: Evitar el problema: • Estantes y cajones sobrecargados • Riesgo de lesiones. • Cargar el producto de manera inadecuada • El mobiliario inestable puede volcarse. puede causar la inestabilidad. • Estantes y cajones sobrecargados pueden romperse.
5-YEAR LIMITED WARRANTY 1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a period of five years from the date of purchase against defects in materials or workmanship of Sauder furniture components. As used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 2.
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the purchase and assembly process was a positive experience and you feel good about the furniture you just built. If you need assistance or want to learn more, please contact our award-winning, Ohio-based customer service team at 800-523-3987 or Sauder.com. Set a world record for speed? Feeling good about yourself? Nice. Get social with it on any of these quality share sites.