Instructions / Assembly

Push two METAL PINS (M) into the top edge of the ENDS (A and B).
Fasten the ENDS (A and B) to the TOP (C). Tighten two HIDDEN CAMS.
NOTE: Be sure the METAL PINS in the ENDS insert into the holes in the TOP.
Fasten the SHELF (E) to the ENDS (A and B). Use four BLACK 1-7/8" FLAT HEAD SCREWS (O).
2
2
S
t
e
p
Page 6 www.sauder.com/services 413034
A
B
C
E
Curved edge
Finished edge
Surface with
more holes
Finished edge
M
M
BLACK 1-7/8" FLAT HEAD SCREW
(4 used in this step)
O
Caution
Risk of damage or
injury. Hidden Cams
must be completely
tightened. Hidden
Cams that are not
completely tightened
may loosen, and parts
may separate.
To completely tighten:
Start Tighten
Arrow
Maximum
210 degrees
Minimum
190 degrees
Arrow