Instructions / Assembly

Carefully turn your unit over onto its front edges. Unfold the BACKS (G) and lay them over your unit.

NOTE: The BACKS (G) will overlap each other over the SHELF (E).

Make equal margins along three edges of the BACKS (G). Push on opposite corners of your unit if needed to make it "square".

Fasten the BACKS (G) to your unit using the NAILS (R). The NAILS should be approximately 5" apart, 1-1/2" from the corners, and

1/4" in from the edges.

Fasten the FEET (K) to the BOTTOM (D). Use five BLACK 9/16" PAN HEAD SCREWS (P).

Page 8 www.sauder.com/services 413034

Do not stand the unit upright without the

BACK fastened. The unit may collapse.

Caution

NAIL

(42 used in this step)

Unﬁ nished

Overlap the BACKS and

nail them to the SHELF (E).

For support, place packing

foam and magazines here.

1/4”

1-1/2”

BLACK 9/16" PAN HEAD SCREW

(5 used for the FEET)