Instructions / Assembly

å
Carefully turn your unit over onto its front edges. Unfold the
BACK (H) and lay it over your unit.
å
Make equal margins along all four edges of the BACK (H). Push
on opposite corners of your unit if needed to make it "square".
å
Fasten the BACK (H) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up over the
UPRIGHT (C) and SHELVES (F and G).
Step 13
414725www.sauder.com/services
Page 17
H
These holes must line up over
the UPRIGHT and SHELVES.
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Unfi nished
surface
NAIL
(77 used in this step)
1N