Instructions / Assembly
Step 13
414941www.sauder.com/services
Pae 17
60M
61M
BLACK 9/16" LARGE HEAD SCREW
(1 used in this step)
1S
13M
å
Carefully stand your unit upriht.
å
Position your unit in its fi nal location. We recommend usin the SAFETY STRAP (60M) for added stability.
å
NOTE: Do not turn the SAFETY DRYWALL ANCHOR (61M) into a wall stud. If you prefer to fasten the SAFETY
STRAP (60M) to a wall stud, o to your local hardware store for proper hardware.
å
INSTALLATION INSTRUCTIONS: (Also available at www.yl-anchors.com)
1. Insert the SAFETY DRYWALL ANCHOR (61M) throuh the WASHER (13M) and one end of the SAFETY STRAP (60M).
2. Usin a Phillips screwdriver or a hand drill, press screw slihtly onto the drywall.
3. Apply pressure; turn the screw until a pilot hole is made and the nylon sheath slips throuh.
4. Turn the screw until it is fl ush aainst the wall and you feel a fi rm resistance.
5. Continue to turn until the screw starts spinnin freely.
å
Insert the other end of the SAFETY STRAP (60M) throuh the upper openin in the back of your unit, then use a BLACK
9/16" LARGE HEAD SCREW (1S) throuh the SAFETY STRAP and into the pre-drilled hole in the underside of the TOP.
å
NOTE: Before movin your unit to a di erent location, unscrew the SAFETY DRYWALL ANCHOR (61M) from your wall.
The nylon sheath will remain behind your wall.
å
To insert the drawers into your unit, tip the front of the drawers down and drop the lides on the drawers behind the lides
on the unit. Lift the front of the drawers up and slide them into the unit
20 lbs.
20 lbs.
I
H
G
G
G
30 lbs.