Instructions / Assembly

å
Fasten the UPRIGHTS (C2 and D2) to the BRACES (H
and X2). Tihten four TWIST-LOCK® FASTENERS.
Step 5
414942 www.sauder.com/servicesPae 10
How to use the SAUDER TWIST-LOCK
®
FASTENER
1. Insert the dowel end of the FASTENER into the hole of the
adjoinin part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoinin part while lockin
the FASTENER.
2. Tihten the FASTENER with a Phillips screwdriver as tiht
as possible.
Dowel end
Surface with TWIST-LOCK® FASTENERS
Surface with TWIST-LOCK® FASTENERS
Surface with
TWIST-LOCK®
FASTENERS
Surface without
TWIST-LOCK®
FASTENERS
These holes
must be here.
Finished ede
Finished ede
C2
D2
H
X2