Instructions / Assembly

Step
414942www.sauder.com/services
Pae 23
Step 18
P
P
P
M67
M67
D167
D974
D30
D30
D30
D31
D31
D31
The tabs should insert freely into the
slots. Gently tilt the DRAWER SIDES side
to side until the tabs slip into the slots.
With the palm of your hand, tap the
DRAWER BOTTOM down into the roove.
Groove
VIEW THE T-LOCK BOX VIDEO
Unfi nished
surface
å
Insert the LOWER DRAWER SIDES (D30 and D31) at
an angle into the slot at each end of the LOWER
DRAWER FRONT (P).
å
Slide the LOWER DRAWER BOTTOM (D974) into the
grooves in the LOWER DRAWER SIDES (D30 and D31)
and LOWER DRAWER FRONT (P).
å
Fasten the DRAWER BRACE (M67) to the LOWER
DRAWER FRONT (P). Tighten one HIDDEN CAM.
å
Fasten the LOWER DRAWER BACK (D167) to the LOWER
DRAWER SIDES (D30 and D31) and DRAWER BRACE (M67).
Use five BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å
Repeat this step for the other drawers. The drawers will use
DRAWER FRONTS (M and N), DRAWER SIDES (D24 and D25),
DRAWER BACKS (D170), and DRAWER BOTTOM (D945). The
upper drawer will use UPPER DRAWER FRONT (O), UPPER
DRAWER SIDES (D12 and D13), UPPER DRAWER BACK (D166),
and the remaining LOWER DRAWER BOTTOM (D974).
Surface with
HIDDEN CAM
12
34
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT roove.
Arrow
Maximum
210 derees
Minimum
190 derees
Start each screw a few turns before
completely tihtenin any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(20 used in this step)
30S