Instructions / Assembly

Step
å
Insert a SLIDE CAM (10A) into the LOWER
DRAWER SIDES (D30 and D31).
å
Fasten a DRAWER RIGHT (35GC) to the LOWER RIGHT
DRAWER SIDE (D30) and a DRAWER LEFT (35GD) to the
LOWER LEFT DRAWER SIDE (D31). Use four GOLD 5/16"
FLAT HEAD SCREWS (3S) throuh holes #1 and #3.
å
NOTE: The screw head in the CAM must be visible
throuh the slotted hole in the SLIDE.
å
Repeat this step for the other drawers.
Step 19
414942 www.sauder.com/servicesPae 24
D30
D31
1
2
3
1
2
3
Roller end
Roller end
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
10A
GOLD 5/16" FLAT HEAD SCREW
(16 used in this step)
3S
(4 screws per drawer)