Instructions / Assembly

Step

To insert the drawers into your unit, tip the front of

the drawers down and drop the rollers on the drawers

behind the rollers on the unit. Lift the front of the

drawers up and slide them into the unit.

We recommend usin the SAFETY BRACKET (1G)

for added stability. Use a BLACK 9/16" LARGE HEAD

SCREW (1S) into the top of the unit and a BLACK 1-7/8"

FLAT HEAD SCREW (2S) into a stud in your wall.

Apply the WARNING LABEL (5L) to the upper LEFT

DRAWER SIDE (D25). You should be able to read the

label when the drawer is open. When the drawer is

closed, it will hide the label. Peel o the backin and

apply the label as shown in the diaram.

NOTE: This is a permanent label intended to last for

the life of the product. Once applied, do not try to

remove it.

Step 21

414942 www.sauder.com/servicesPae 26

20 lbs.

30 lbs.

50 lbs.

Serious or fatal crushin injuries can

occur from furniture tip-over. To help

prevent tip-over:

-Place heaviest items in the lowest drawers.

-Unless speciﬁ cally desined to accommodate,

do not set TVs or other heavy objects on top of

this product.

-Never allow children to climb or han on

drawers, doors, or shelves.

-Never open more than one drawer at a time.

-If equipped with a drawer interlock system, do not

defeat or remove it.

Use of tip-over restraints may only reduce,

but not eliminate, the risk of tip-over.

WARNING

BLACK 9/16" LARGE HEAD SCREW

(1 used into the top of your unit)

BLACK 1-7/8" FLAT HEAD SCREW

(1 used into a stud in your wall)

D25