sauder.com WARNING CHOKING HAZARD - Small Parts Not for children under 3 years. Adult assembly required. Night Stand Carson Forge Collection | Model 415050 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. Prefer the phone? Call 1-800-523-3987. Share your journey! PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Table of Contents Part Identification Hardware Identification Assembly Steps Assembly Tools Required 3 No. 2 Phillips Screwdriver Tip Shown Actual Size 4 5-19 Hammer Français 20-22 Español 23-25 Safety 26 Warranty 27 Page 2 Not actual size Skip the power trip. This time. 415050 www.sauder.
Now you know our ABCs. Part Identification å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit.
Look for this icon. It means a video assembly tip is available at www.sauder.com/services/tips Step 1 å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. å Push twelve HIDDEN CAMS (1F) into the ENDS (A2 and B2) and BOTTOM (D). Then, insert the metal end of a CAM DOWEL (2F) into each HIDDEN CAM, except the long edges of the ENDS (A2 and B2). Do not tighten the HIDDEN CAMS in this step.
Step 2 å å Turn four CAM SCREWS (8F) into the FRONT LEGS (F and G). Fasten the FRONT LEGS (F and G) to the ENDS (A2 and B2). Tighten four HIDDEN CAMS. 8F (4 used) G F Angled edge These surfaces should be even. G B2 S H urf ID a D ce E w N i C th A M S These surfaces should be even. Angled edge S H urf ID a D ce E w N i C th A M S A2 Edge with CAM DOWELS F 1 Page 6 2 415050 www.sauder.
Step 3 å Fasten the BACK LEGS (H) to the ENDS (A2 and B2). Use four BLACK 2-1/4" FLAT HEAD SCREWS (26S). Remember: Righty tighty. Lefty loosey. Angled edge S H urf ID a D ce E w N i C th A M S B2 H H S H urf ID a D ce E w N i C th A M S A2 26S BLACK 2-1/4" FLAT HEAD SCREW (4 used in this step) www.sauder.
Step 4 VIEW THE DRAWER GLIDE VIDEO å Fasten the UNIVERSAL CABINET RAILS* (35AA) to the ENDS (A2 and B2). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3. å *patent pending glide system 3S Glide end GOLD 5/16" FLAT HEAD SCREW (4 used in this step) 1 2 3 F 3 S H urf ID a D ce E w N i C th A M S A2 Glide end 2 1 G Page 8 S H urf ID a D ce E w N i C th A M S B2 415050 www.sauder.
Step 5 å Fasten the BOTTOM (D) to the LEFT END (B2). Tighten two HIDDEN CAMS. Caution Do not stand the unit upright without the BACK fastened. The unit may collapse. G B2 ith e w MS c a f A Sur EN C D HID Notched edge D Sur f HID ace wi DEN th CA MS Caution Risk of damage or injury. HIDDEN CAMS must be completely tightened. HIDDEN CAMS that are not completely tightened may loosen, and parts may separate. To completely tighten: www.sauder.
Step 6 å Slide the BOTTOM MOLDING* (K) onto the notched edge of the BOTTOM (D). å *U.S. Patent No. 5,499,886 Notched edge K D Groove Page 10 415050 www.sauder.
Step 7 å å Insert four METAL PINS (1R) into the DUST RAIL (J). å Fasten the RIGHT END (A2) to the BOTTOM (D). Tighten two HIDDEN CAMS. å NOTE: Be sure the METAL PINS (1R) in the DUST RAIL (J) insert into the holes in the RIGHT END (A2). Maximum 210 degrees Push the METAL PINS (1R) in one end of the DUST RAIL (J) into the LEFT END (B2). Arrow Minimum 190 degrees 1R (4 used) Rounded edge B2 J D F A2 www.sauder.
Step 8 å Fasten the TOP (C) to the ENDS (A2 and B2). Tighten four HIDDEN CAMS. Maximum 210 degrees Arrow Minimum 190 degrees Curved edge Sur fac ew ith hol es C B2 A2 Page 12 415050 www.sauder.
Step 9 å Carefully turn your unit over onto its front edges. Lay the BACK (E) over your unit. å Make equal margins along all four edges of the BACK (E). Push on opposite corners of your unit if needed to make it "square". å Fasten the BACK (E) to your unit using the NAILS (1N). Caution Do not stand the unit upright without the BACK fastened. The unit may collapse. 1N NAIL (20 used in this step) This hole should be over the screw head. n io at p. rm u fo g in cin d fa te e in b Pr ust m E www.
Step 10 å å Push four FEET (10E) onto the LEGS (F, G, and H). å Push a CAM COVER (12P) onto each visible HIDDEN CAM on the BOTTOM (D). Now might be a good time to refresh your drink. With a hammer, tap four TACK GLIDES (12E) through the holes of the FEET (10E). H 10E D H 10E F 10E G 10E 12P 12E (4 used) To cover HIDDEN CAMS Page 14 415050 www.sauder.
Step 11 VIEW THE T-LOCK BOX VIDEO 1 2 The tabs should insert freely into the slots. Gently tilt the DRAWER SIDES side to side until the tabs slip into the slots. With the palm of your hand, tap the DRAWER BOTTOM down into the groove. Un fi su nish rfa ed ce D83 D706 D83 D84 I D84 I Groove å Be sure the DRAWER BOTTOM inserts into the DRAWER FRONT groove. Insert the DRAWER SIDES (D83 and D84) at an angle into the slot at each end of the DRAWER FRONT (I).
Step 12 VIEW THE DRAWER GLIDE VIDEO å å Insert a SLIDE CAM (10A) into the DRAWER SIDES (D83 and D84). å å NOTE: The glides are not intended to rotate. Fasten a DRAWER RIGHT (35AC) to the DRAWER RIGHT SIDE (D83) and a DRAWER LEFT (35AD) to the DRAWER LEFT SIDE (D84). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2. NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
Step 13 å Fasten a KNOB (52K) to the DRAWER FRONT (I). Use one GOLD 1" MACHINE SCREW (50S). 50S GOLD 1" MACHINE SCREW (1 used in this step) I 52K www.sauder.
Step 14 å å Carefully stand your unit upright. å Push a CAM COVER (12P) onto each visible HIDDEN CAM. Pro Tip: Lift with your legs. And, you know, your arms. To insert the drawer into your unit, tip the front of the drawer down and drop the glides on the drawer behind the glides on the unit. Lift the front of the drawer and slide it into your unit. 40 lbs. 10 lbs. 30 lbs. 12P (2 used) To cover HIDDEN CAMS Page 18 415050 www.sauder.
Step 15 å To make adjustments to the drawers, loosen SCREW #2 in the SLIDES a 1/4 turn, then turn the CAM clockwise or counter-clockwise. Notice how the drawer raises or lowers as you turn the CAM. The higher the screw in the oblong hole, the higher your drawer front will be. The lower the screw, the lower the drawer front. By adjusting the drawers this way, it will help the DRAWER FRONTS line up better when closed. Tighten the SCREW when finished with adjustments.
Modèle 415050 Utilisez les instructions d’assemblage en français avec les schémas étape par étape du manuel d’instruction en anglais. Chaque étape en français correspond à la même étape en anglais. La pièce devant être attachée à l’élément est représentée en gris sur les schémas de chaque étape pour plus de précision. Comparer la “Liste de pièces” ci-dessous avec la “PART IDENTIFICATION” du manuel en anglais pour vous familiariser avec les pièces avant l’assemblage.
ÉTAPE 1 ÉTAPE 6 Ne pas serrer les EXCENTRIQUES ESCAMOTABLES dans cette étape. Enfiler la MOULURE DE DESSOUS* (K) sur le chant cranté du DESSOUS (D). Assembler l'élément sur un sol à moquette ou sur le carton vide pour éviter d'endommager l'élément ou le sol. Enfoncer douze EXCENTRIQUES ESCAMOTABLES (1F) dans les EXTRÉMITÉS (A2 et B2) et le DESSOUS (D).
ÉTAPE 11 ÉTAPE 14 1. Insérer les CÔTÉS DE TIROIR (D83 et D84) en biseau dans la fente dans chaque extrémité du DEVANT DE TIROIR (I). Relever, avec précaution, l'élément dans sa position verticale. 2. Enfiler le FOND DE TIROIR (D706) dans les rainures des CÔTÉS DE TIROIR (D83 et D84) et du DEVANT DE TIROIR (I). Pour insérer le tiroir dans l'élément, abaisser le devant du tiroir et faire passer les coulisses situées sur le tiroir derrière les coulisses situées sur l'élément.
Modelo 415050 Use estas instrucciones de ensamblaje en español junto con las figuras paso-a-paso provistas en el folleto inglés. Cada paso en español corresponde al mismo paso en inglés. Se destacan las figuras de cada paso con una tonalidad oscura para mostrar precisamente cual parte se debe montar a la unidad. Compare la “Lista de Part” abajo con la “Part Identification” en el folleto en inglés para familiarizarse con Las partes de ensamblaje.
PASO 1 PASO 6 No apriete los EXCÉNTRICOS ESCONDIDOS en este paso. Deslice la MOLDURA DE FONDO* (K) sobre el borde con muesca del FONDO (D). Ensamble la unidad sobre un piso alfombrado o sobre el cartón vacío para evitar rayar la unidad o el piso. *Patente EE. UU. No. 5,499,886 Empuje doce EXCÉNTRICOS ESCONDIDOS (1F) en los EXTREMOS (A2 y B2) y el FONDO (D).
PASO 11 PASO 14 1. Inserte los LADOS DE CAJÓN (D83 y D84) en ángulo en el encaje en cada extremo de la CARA DE CAJÓN (I). Cuidadosamente ponga la unidad en posición vertical. 2. Deslice el FONDO DE CAJÓN (D706) dentro de las ranuras de los LADOS DE CAJÓN (D83 y D84) y de la CARA DE CAJÓN (I). 3. Fije el DORSO DE CAJÓN (D74) a los LADOS DE CAJÓN (D83 y D84). Utilice cuatro TORNILLOS NEGROS DE CABEZA PERDIDA de 40 mm (30S).
WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded drawers and shelves. • Risk of injury. • Never exceed the weight limits shown in • Top-heavy furniture can tip over. the instructions. • Overloaded drawers or shelves can break. • Work from bottom to top when loading shelves and drawers.
5-YEAR LIMITED WARRANTY 1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a period of five years from the date of purchase against defects in materials or workmanship of Sauder furniture components. As used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 2.
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the purchase and assembly process was a positive experience and you feel good about the furniture you just built. If you need assistance or want to learn more, please contact our award-winning, Ohio-based customer service team at 800-523-3987 or Sauder.com. Set a world record for speed? Feeling good about yourself? Nice. Get social with it on any of these quality share sites.
