Instructions / Assembly

Fasten two ANGLE BRACKETS (27G) to one of the PANELS (G). Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: Be sure the edges of the ANGLE BRACKETS are even with the edge of the PANEL.
Fasten the PANEL (G) to the RIGHT END (A). Tighten two HIDDEN CAMS.
Fasten the PANEL (G) to the SHELF (E). Use two BLACK 9/16" LARGE HEAD SCREWS (1S) through the ANGLE BRACKETS
on the PANEL and into the SHELF.
4
4
S
t
e
p
Page 8 www.sauder.com/services 415547
G
27G
Surface with
HIDDEN CAMS
Maximum
210 degrees
Minimum
190 degrees
Arrow
G
E
A
Surface with
HIDDEN
CAMS
BLACK 9/16" LARGE HEAD SCREW
(4 used for the BRACKETS)
1S
These holes
must be here.