sauder.com Your center of attention. Entertainment Credenza Barrister Lane Collection | 416798 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. Prefer the phone? Call 1-800-523-3987. Share your journey! PLEASE READ AND KEEP FOR FUTURE REFERENCE. English pg 1-20 Français pg 21-24 Español pg 25-28 Lot # 376537 08/25/15 Purchased: __________________ Be sure to give us a ring before making any returns.
Table of Contents Part Identification Hardware Identification Assembly Steps Assembly Tools Required 3 No. 2 Phillips Screwdriver Tip Shown Actual Size 4-5 6-20 Hammer Français 21-24 Español 25-28 Safety 29-30 Warranty Not actual size Skip the power trip. This time. 31 ! WARNING Use of a TV that is too heavy or large is hazardous. A TV that is too heavy will create a risk of a tip-over that can cause severe injury or death.
Now you know our ABCs. Part Identification å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit. 1F 23E FOOT - 2 HIDDEN CAM - 30 2F CAM DOWEL - 30 4G METAL BRACKET - 9 31G CORNER 27H HINGE - 4 2I SMALL MAGNETIC CATCH - 1 6I 12I MAGNETIC CATCH - 1 69K KNOB - 1 3L WARNING LABEL - 1 33M BRACKET - 2 STRIKE PLATE - 2 DECORATIVE END - 2 WARNING Never use this furniture with a TV that is too large or too heavy. Severe injury or death can occur.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit. 1S 2S BLACK 9/16" LARGE HEAD SCREW - 46 BLACK 1-7/8" FLAT HEAD SCREW - 4 11S BLACK 1/2" FLAT HEAD SCREW - 2 20S SILVER 3/4" MACHINE SCREW - 2 51S BLACK 9/16" PAN HEAD SCREW - 2 95S SILVER 1-1/2" MACHINE SCREW - 1 www.sauder.
Look for this icon. It means a video assembly tip is available at www.sauder.com/services/tips Step 1 å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. å Push thirty HIDDEN CAMS (1F) into the ENDS (A and B), UPRIGHTS (C and D), TOP (E2), BOTTOM (F), and CATCH BRACE (Q). Then, insert the metal end of a CAM DOWEL (2F) into each HIDDEN CAM. Do not tighten the HIDDEN CAMS in this step.
Step 2 å Fasten the END MOLDINGS (P) to the ENDS (A and B) and UPRIGHTS (C and D). Tighten twelve HIDDEN CAMS. These holes should be located here. S HI urfa DD ce EN wi CA th M S P S HI urfa DD ce EN wi CA th M S A These holes should be located here. B P S HI urfa DD ce EN wi CA th M S P S HI urfa DD ce EN wi CA th M S C D P Caution Risk of damage or injury. HIDDEN CAMS must be completely tightened. HIDDEN CAMS that are not completely tightened may loosen, and parts may separate.
Step 3 å Fasten the METAL BRACKETS (4G) to the UPRIGHTS (C and D), BOTTOM (F), and TOP MOLDING (M). Use nine BLACK 9/16" LARGE HEAD SCREWS (1S). å NOTE: The METAL BRACKETS should hang over the edges slightly on the UPRIGHTS. å NOTE: The METAL BRACKETS should be even with the edges on the BOTTOM and TOP MOLDING. å Fasten the CORNER BRACKETS (31G) to the BOTTOM (F). Use four BLACK 9/16" LARGE HEAD SCREWS (1S). Remember: Righty tighty. Lefty loosey.
Step 4 å Fasten the LEFT END (B) and STOP MOLDING (R) to the TOP (E2). Tighten six HIDDEN CAMS. Maximum 210 degrees Caution Arrow Minimum 190 degrees Do not stand the unit upright without the BACK fastened. The unit may collapse. Finished surface R P withMS e c fa A Sur DEN C HID E2 B www.sauder.
Step 5 å Fasten the UPRIGHTS (C and D) to the TOP (E2). Tighten four HIDDEN CAMS. Maximum 210 degrees Arrow Minimum 190 degrees P E2 ith e w AMS c a f Sur DEN C D HI D P ut itho S w e fac AM Sur DEN C HID C Page 10 416798 www.sauder.
Step 6 å Fasten the BOTTOM (F) to the LEFT END (B). Tighten two HIDDEN CAMS. å Fasten the CORNER BRACKET (31G) on the BOTTOM (F) to the LEFT END (B). Use two BLACK 9/16" LARGE HEAD SCREWS (1S) through the CORNER BRACKET and into the LEFT END. å Maximum 210 degrees Arrow Minimum 190 degrees Fasten the BOTTOM (F) to the UPRIGHTS (C and D). Use four BLACK 1-7/8" FLAT HEAD SCREWS (2S).
Step 7 å Fasten the RIGHT END (A) to the TOP (E2). Tighten two HIDDEN CAMS. Maximum 210 degrees å Fasten the RIGHT END (A) to the BOTTOM (F). Tighten two HIDDEN CAMS. å Fasten the CORNER BRACKET (31G) on the BOTTOM (F) to the RIGHT END (A). Use two BLACK 9/16" LARGE HEAD SCREWS (1S) through the CORNER BRACKET and into the RIGHT END. Arrow Minimum 190 degrees E2 P ut itho S w e fac AM Sur DEN C HID F A 1S 31G BLACK 9/16" LARGE HEAD SCREW (2 used for the CORNER BRACKET) Page 12 416798 www.
Step 8 Fasten the TOP MOLDING (M) to the TOP (E2). Use four BLACK 9/16" LARGE HEAD SCREWS (1S) through the BRACKETS and into the TOP. Maximum 210 degrees å NOTE: To fasten the TOP MOLDING, you may need to loosen the HIDDEN CAMS in the END MOLDINGS (P). Then, retighten the HIDDEN CAMS. Minimum 190 degrees å Fasten the TOP MOLDING (M) to the UPRIGHTS (C and D). Use two BLACK 9/16" LARGE HEAD SCREWS (1S) through the BRACKETS and into the TOP MOLDING. å Fasten the CATCH BRACE (Q) to the TOP MOLDING (M).
Step 9 Fasten the BASE (L) to the ENDS (A and B) and BOTTOM (F). Use seven BLACK 9/16" LARGE HEAD SCREWS (1S) through the BRACKETS and into the BASE. å Don't worry. It isn't Rome. This can be built in a day. 1S Curved edge BLACK 9/16" LARGE HEAD SCREW (7 used in this step) L ed h is n Fi e ac rf su B F A Page 14 416798 www.sauder.
Step 10 å Carefully turn your unit over onto its front edges. Unfold the BACK (G) and lay it over your unit. å Make equal margins along all four edges of the BACK (G). Push on opposite corners of your unit if needed to make it "square". å å Fasten the BACK (G) to your unit using the NAILS (1N). å NOTE: Perforations have been provided for access through the BACK. Carefully cut out the holes needed. å Caution Do not stand the unit upright without the BACK fastened. The unit may collapse.
Step 11 å å å IMPORTANT: You may need someone's help in this step. å Fasten the MAGNETIC CATCH (12I) to the CATCH BRACE (Q). Use two BLACK 9/16" PAN HEAD SCREWS (51S). å NOTE: The MAGNETIC CATCH (12I) goes on the right side with DOOR (I). Pro Tip: Lift with your legs. And, you know, your arms. Carefully stand your unit upright. Push the SMALL MAGNETIC CATCH (2I) into the center hole in the CATCH BRACE (Q).
Step 12 å Fasten the HINGES (27H) to the DOORS (H and I). Use eight BLACK 9/16" LARGE HEAD SCREWS (1S). å NOTE: The HINGES should be positioned exactly as shown. Position the HINGE exactly as shown. 27H 1S BLACK 9/16" LARGE HEAD SCREW (8 used in this step) H I 27H www.sauder.com/services Position the HINGE exactly as shown.
Step 13 å Fasten the DOORS (H and I) to the END MOLDINGS (P) on the UPRIGHTS (C and D). Use eight BLACK 9/16" LARGE HEAD SCREWS (1S). å Fasten the DECORATIVE ENDS (33M) to the DOOR (H). Use two SILVER 3/4" MACHINE SCREWS (20S). å å Insert the DECORATIVE POSTS (39M) into the DECORATIVE ENDS. å Fasten the STRIKE PLATES (6I) to the DOORS (H and I). Use two BLACK 1/2" FLAT HEAD SCREWS (11S).
Step 14 å Slide the SHELF MOLDINGS (N and O) onto the notched edges of the ADJUSTABLE SHELVES (J and K). å *U.S. Patent No. 5,499,886 Notched edge J Fi su nish rfa ed ce N K O Notched edge Fi su nish rfa ed ce Notched edge K O www.sauder.
Step 15 å Apply the WARNING LABEL (3L) to the TOP (E2). You should be able to read the label when the TV is removed from the unit. When the TV is in place, it should hide the label. Peel off the backing and apply the label as shown in the diagram. å å NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it. å å å Push a CAM COVER (36P) onto each visible HIDDEN CAM. Push the RUBBER SLEEVES (2R) over the METAL PINS (1R).
416798 Utilisez les instructions d’assemblage en français avec les schémas étape par étape du manuel d’instruction en anglais. Chaque étape en français correspond à la même étape en anglais. La pièce devant être attachée à l’élément est représentée en gris sur les schémas de chaque étape pour plus de précision. Comparer la “Liste de pièces” ci-dessous avec la “PART IDENTIFICATION” du manuel en anglais pour vous familiariser avec les pièces avant l’assemblage.
ADVERTISSEMENT ÉTAPE 2 L'utilisation d'un téléviseur trop lourd ou trop gros est dangereuse. Un téléviseur trop lourd créera un risque de basculement pouvant provoquer de graves blessures ou la mort. Un téléviseur trop gros pour l'espace disponible risque d'être accidentellement poussé ou de tomber du mobilier ou d'être sujet à basculer. Fixer les MOULURES D'EXTRÉMITÉ (P) aux EXTRÉMITÉS (A et B) et MONTANTS (C et D). Serrer douze EXCENTRIQUES ESCAMOTABLES. • Vérifier la taille et le poids du téléviseur.
ÉTAPE 5 ÉTAPE 8 Fixer les MONTANTS (C et D) au DESSUS (E2). Serrer quatre EXCENTRIQUES ESCAMOTABLES. Fixer la MOULURE DE DESSUS (M) au DESSUS (E2). Utiliser quatre VIS TÊTE LARGE 14 mm NOIRES (1S) à travers les CONSOLES et dans le DESSUS. ÉTAPE 6 REMARQUE : Pour fixer la MOULURE DE DESSUS, il faut peut-être desserrer les EXCENTRIQUES ESCAMOTABLES dans les MOULURES D'EXTRÉMITÉ (P). Ensuite, resserrer les EXCENTRIQUES ESCAMOTABLES. Fixer le DESSOUS (F) à l'EXTRÉMITÉ GAUCHE (B).
ÉTAPE 11 ÉTAPE 14 IMPORTANT : L'assistance d'autrui peut être nécessaire à cette étape. Enfiler les MOULURES DE TABLETTE (N et O) sur le chant cranté des TABLETTES RÉGLABLES (J et K). Relever, avec précaution, l'élément dans sa position verticale. * Brevet État Unis n° 5,499,886 Enfoncer un PETITE LOQUETEAU MAGNÉTIQUE (2I) dans le trou central de chaque ENTRETOISE DE LOQUETEAU (Q). Fixer le LOQUETEAU MAGNÉTIQUE (12I) à l'ENTRETOISE DE LOQUETEAU (Q).
416798 Use estas instrucciones de ensamblaje en español junto con las figuras paso-a-paso provistas en el folleto inglés. Cada paso en español corresponde al mismo paso en inglés. Se destacan las figuras de cada paso con una tonalidad oscura para mostrar precisamente cual parte se debe montar a la unidad. Compare la “Lista de Part” abajo con la “Part Identification” en el folleto en inglés para familiarizarse con Las partes de ensamblaje.
ADVERTENCIA PASO 2 El uso de un televisor demasiado pesado o grande es peligroso. Un televisor demasiado pesado generará riesgo de caída, lo cual podría causar lesiones graves o muerte. Un televisor demasiado grande para el espacio disponible puede ser empujado o golpeado por accidente, causando que éste se salga del mueble o se caiga. Fije las MOLDURAS DE EXTREMO (P) a los EXTREMOS (A y B) y a los PARALES (C y D). Apriete doce EXCÉNTRICOS ESCONDIDOS. • Verifique el tamaño y peso del televisor.
PASO 6 PASO 8 Fije el FONDO (F) al EXTREMO IZQUIERDO (B). Apriete dos EXCÉNTRICOS ESCONDIDOS. Fije la MOLDURA DE PANEL SUPERIOR (M) al PANEL SUPERIOR (E2). Pase cuatro TORNILLOS NEGROS DE CABEZA GRANDE de 14 mm (1S) a través de los SOPORTES y en el PANEL SUPERIOR. Fije la MÉNSULA DE ESQUINA (31G) del FONDO (F) al EXTREMO IZQUIERDO (B). Pase dos TORNILLOS NEGROS DE CABEZA GRANDE de 14 mm (1S) a través de la MÉNSULA DE ESQUINA y en el EXTREMO IZQUIERDO. Fije el FONDO (F) a los PARALES (C y D).
PASO 11 PASO 14 IMPORTANTE: Usted puede necesitar la ayuda de alguien para este paso. Deslice las MOLDURAS DE ESTANTE (N y O) sobre los bordes con muesca de los ESTANTES AJUSTABLES (J y K). Cuidadosamente ponga la unidad en posición vertical. *Patente EE. UU. No. 5,499,886 Empuje el AGARRADOR MAGNÉTICO PEQUEÑO (2I) en el agujero central en la RIOSTRA DE AGARRADOR (Q). Fije el AGARRADOR MAGNÉTICO (12I) a la RIOSTRA DE AGARRADOR (Q). Utilice dos TORNILLOS NEGROS DE CABEZA REDONDA de 14 mm (51S).
WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Children climbing on furniture. • A child may try to reach a toy or other object by climbing on furniture. • Children will play and be active near the TV. • Risk of injury or death.
ADVERTENCIA Por favor use el mobiliario correcta y seguramente. El mal uso puede causar riesgos de seguridad o daño a las unidades o artículos domésticos. Cuidadosamente lea la tabla a continuación. Esté alerto de: Puede ocurrir: Evitar el problema: • Los niños subiendo al mobiliario. • El niño que intenta a alcanzar un juego u otro objeto subiendo al mobiliario. • Los niños jugarán y estarán activos cerca del televisor. • Riesgo de lesiones o la muerte.
5-YEAR LIMITED WARRANTY 1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a period of five years from the date of purchase against defects in materials or workmanship of Sauder furniture components. As used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 2.
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the purchase and assembly process was a positive experience and you feel good about the furniture you just built. If you need assistance or want to learn more, please contact our award-winning, Ohio-based customer service team at 800-523-3987 or Sauder.com. Set a world record for speed? Feeling good about yourself? Nice. Get social with it on any of these quality share sites.
